Control of Chemical Reaction of Aluminium Nanoparticles by Silicon Polymer Coating
Journal Title: Journal of Advanced Chemical Engineering - Year 2017, Vol 7, Issue 1
Abstract
By using silicon polymer, the chemical reaction of Aluminium nanoparticles was controlled, especially, the corrosion reaction was reduced. The coverage of the silicon polymer film on Al nanoparticles was controlled, which changed the chemical reaction rate quantitatively. TEM (Transmission Electron Microscope) analysis indicated that the polymer film of 10 nm thick fully covered Al nanoparticle in the case of 5 mass% polymer coated Al particles in the synthesis. On the other hand, 0.4-1.0 mass% polymer coated Al was partially covered by a film. The AFM-KFM (Atomic Force Microscope-Kelvin prove Force Microscope) demonstrated that the conductivity of the Al nanoparticle was isolated by the polymer. Both the corrosion and H2 evolution reaction rates were quantitatively reduced by the mass% of polymer coating on the surface of Al particle. This fact suggested that the electrochemical reaction was suppressed by the polymer coating. It was found that the chemical reaction rate of Al nanoparticles could be quantitatively controlled by the coverage of the silicon coating
Authors and Affiliations
Toshiyasu Nishimura
Keywords
Related Articles
- EP ID EP356362
- DOI 10.4172/2090-4568.1000173
- Views 40
- Downloads 0
Heat and Mass Transfer for Hartmann and Dufour’s Effects on Irreversibilities at Double-Diffusive Natural Convection in a Square Cavity
In this paper, entropy generation of double-diffusive natural convection in a 2D dimensional enclosure with magnetic and Dufour effects has been numerically performed. Dirichlet boundary conditions for temperature and so...
Characterization of Thermally Regenerated Activated Carbons Used in Rum Production by Acoustic Emission Analysis, N2 and Ar Gas Adsorption
Acoustic emission analysis applied for the characterization of granular activated carbons (GAC) has been barely explored. The porosity of regenerated GAC used in rum production has been assessed using the acoustic emissi...
Synthesis and Potential Adsorption of Fe3O4@C Core-Shell Nanoparticles for to Removal of Pollutants in Aqueous Solutions: A Brief Review.
Core-shell Fe3O4@C nanoparticles consist of a magnetic core and carbon coating, and exhibit high adsorptive capacity, easy magnetic separation and reusability. Due to these properties, core–shell Fe3O4@C nanoparticles ha...
Catalytic Ozonation: An Advanced Strategy for the Removal of Nitro Phenols from Contaminated Water
Novel advanced oxidation processes (AOPs) show extraordinary potential for application in numerous waste water treatment. This research work provides a solution for the removal of nitro phenols a common water pollutant....
Control of Chemical Reaction of Aluminium Nanoparticles by Silicon Polymer Coating
By using silicon polymer, the chemical reaction of Aluminium nanoparticles was controlled, especially, the corrosion reaction was reduced. The coverage of the silicon polymer film on Al nanoparticles was controlled, whic...