Correlation Analysis of Evaluation Indicators for Shield Tail Sealing Grease Waterproof Performance
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 4
Abstract
Objective The performance of shield tail grease significantly influences the effectiveness of the shield tail waterproof seal. While there are numerous performance indicators for shield tail grease, the relationship between these indicators and the waterproof performance of the shield tail is not yet clarified. It is essential to conduct research on the correlation between various grease testing indicators and waterproof performance. Method Four typical shield tail grease materials are selected for pumpability tests, consistency tests, and water pressure sealing tests. Test data for pump delivery, penetration depth, holding pressure time, and waterproof failure pressure are obtained for the four types. Using a self-designed shield tail waterproof performance test device, waterproof performance tests for shield tail grease are conducted. The Pearson correlation coefficient method is employed to analyze the correlation between the four performance indicators and waterproof performance. Result & Conclusion Grease with long fibers can resist certain stresses and exhibit good pressure-holding performance. There is a significant difference in the waterproof failure pressure of different shield tail greases, with the pressure ranging from 0.41 and 0.70 MPa. Not all shield tail greases can meet the design waterproof pressure of 0.60 MPa, and grease performance testing should be considered during grease selection. The penetration depth shows a highly negative correlation with water pressure sealing performance and waterproof failure pressure.
Authors and Affiliations
Shiqing GUO
Keywords
Related Articles
- EP ID EP734180
- DOI 10.16037/j.1007-869x.2024.04.034
- Views 45
- Downloads 0
Industrial Design Methods for Modularization and Pedigree Comprehensive Application in Rail Transit Passenger Vehicles
Objective To address the difficulties faced in the industrial design of rail transit passenger vehicles, it is necessary to integrate innovative industrial design thinking and concepts to establish a comprehensive method...
Influence Analysis of City Railway Large-diameter Shield Parallel Construction on Adjacent High-speed Railway Subgrade Deformation
[Objective] The large-diameter shield section on Shanghai City Railway Airport Link Line is parallel to the existing Shanghai-Hangzhou High-speed Railway. Due to strict deformation control requirements of high-speed rail...
Application Research on Vehicle-ground Integrated Sensing System of Suzhou High-tech Zone Tram
Objective In the semi-independent right-of-way operation scenario of the tram, there exists the potential risk of pedestrians or vehicles entering the track area, especially in the intersection area. The sensing system d...
Signaling System Renovation Key Technology Solutions of Suzhou Rail Transit Line 11 and Line 3 for Through Train Operation
［Objective］ To enable the through train operation between Suzhou Rail Transit Line 11 and Line 3, a customized signaling system upgrade solution is required based on the unique characteristics and operational demands o...
Overview of Articulated Bogie Light Rail Vehicle Investigation Research
［Objective］ To comprehensively grasp market demands and develop a competitive LRV (light rail vehicle) product, investigation research on articulated bogie LRV is conducted. ［Method］ The basic characteristics of ligh...