Crack Detection of Ferromagnetic Materials through Non Destructive Testing Methodology
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 12
Abstract
The real components have so many defects in the material, which acts as a crack. In fact, manufacturing of a component is not ideal. In manufacturing several kinds of defects are generated like voids and inclusions. Thus, it must be check all the critical components through non-destructive techniques (NDT) to detect the potential dangerous cracks. In Certain crucial components such as Airplanes, Space Vehicles, Nuclear Plants, Heavy Machinery, Dams, Concrete etc., online monitoring of defects is necessary. Concrete is different from other construction materials. Concrete can be made from combination of different materials. Its final properties depend on its treatment at construction site. To achieve this, sophisticated technologies are used. Ferromagnetic Composite Iron (FCI) is used in power generating devices and DC brushless Motors. Laminations can be substituted by Ferromagnetic Composite Iron (FCI) materials which offer a great manufacturing advantage. Non Destructive testing (NDT) is a major part of quality control. In Non-Destructive testing (NDT) different materials are tested for surface, volumetric and internal defects present in it. Non Destructive testing (NDT) is also an assurance that the proposed product is good and reliable. To apply these techniques, a certain level of skills is very necessary so that maximum amount of information is fetched related to the proposed product during testing. This paper deals with the Non Destructive Testing Methodology Used for crack detection in ferromagnetic materials.
Authors and Affiliations
Pawan Sharma , Amit Kumar , Mandeep Singh Sidhu , Prof. (Dr. ) B. K. Sharma
Keywords
Related Articles
- EP ID EP127048
- DOI -
- Views 89
- Downloads 0
Static Analysis of Go-Kart Chassis by Analytical and Solid Works Simulation
This paper aims to do modelling, simulation and performing the static analysis of a go kart chassis consisting of Circular beams. Modelling, simulations and analysis are performed using 3-D modelling software...
Study of Strain in Elasto-Plastic Material by X-Ray Diffraction Technique
This research paper highlights the applicability of X-ray diffraction method to evaluate the strain in elasto-plastic material like concrete.The aim of this study is to explore the possibilities of X-Ray diffraction tech...
Tracing and Transmission Cost Allocation of Active Power Flow Based On Extended Incidence Matrix
In the present open access restructured power system market, it is necessary to develop an appropriate pricing scheme that can provide the useful economic information to the market participants such as generation,...
Three Element Beam forming Algorithm with Reduced Interference Effect in Signal Direction
The beam forming algorithm simulated in this project is motivated by analyzing a low-cost radar system that provides wide spatial coverage and very rapid target detection as well as tracking.Desigining towards th...
Design And Analysis Of Precast Load Bearing Walls For Multi Storey Building Using Etabs
In the present scenario of construction industry, time of construction is very crucial factor. Pre-cast construction is gaining significance in general and urban areas in particular. The precast technology is a via...