Cu(II) Ion Adsorption Using Activated Carbon Prepared from Pithecellobium Jiringa (Jengkol) Shells with Ultrasonic Assistance: Isotherm, Kinetic and Thermodynamic Studies

Journal Title: Journal of Engineering and Technological Sciences - Year 2017, Vol 49, Issue 4

Abstract

Adsorption of Cu(II) ions from aqueous solution onto activated carbon (AC) prepared from Pithecellobium jiringa shell (PJS) waste was investigated by conducting batch mode adsorption experiments. The activation with ultrasound assistance removed almost all functional groups in the PJS-AC, while more cavities and pores on the PJS-AC were formed, which was confirmed by FTIR and SEM analyses. The Cu(II) ion adsorption isotherm fitted best to the Freundlich model with average R2 at 0.941. It was also correlated to the Langmuir isotherm with average R2 at 0.889. This indicates that physical sorption took place more than chemical sorption. The maximum Cu(II) ion adsorption capacity onto the PJS-AC for a dose of 1 g was 104.167 mg/g at 30 °C and pH 4.5, where the Langmuir constant was 0.523 L/mg, the Freundlich adsorption intensity was 0.523, and the Freundlich constant was 5.212 L/mg. Cu(II) adsorption followed the pseudo second-order kinetic (PSOKE) model with average R2 at 0.998, maximum adsorption capacity at 96.154 mg/g, PSOKE adsorption rate constant at 0.200 g/mg.min, temperature at 30 °C and pH at 4.5. The changes in enthalpy, entropy, free energy and activation energy were determined, and the results confirmed that Cu(II) adsorption onto the PJS-AC was exothermic chemical adsorption in part. There was a decrease in the degree of freedom and the adsorption was non-spontaneous.

Authors and Affiliations

Abrar Muslim

Keywords

Related Articles

Recovery of Lithium from Geothermal Fluid at Lumpur Sidoarjo by Adsorption Method

The recovery of lithium from geothermal fluid at Lumpur Sidoarjo, Indonesia was investigated employing an adsorption method with polymer membrane as container. The lithium concentration in geothermal fluid from Lumpur Si...

Recent Development of the Empirical Basis for Prediction of Vortex Induced Vibrations

This paper describes the research activity related to VIV that has taken place at NTNU and MARINTEK in Trondheim during the last years. The overall aim of the work has been increased understanding of the VIV phenomenon a...

Corrosion Behavior of Mild Steel in Seawater from Northern Coast of Java and Southern Coast of Bali, Indonesia

The corrosion behavior of mild steel in seawater was investigated using an immersion test and energy-dispersive X-ray spectroscopy in solutions from the sites of Muara Baru, Suramadu and Tol Mandara. As reference, soluti...

Development of Green Pavement for Reducing Oxides of Nitrogen (NOx) in the Ambient Air

The transportation sector is the biggest contributor to air pollution in Indonesia, especially in metropolitan cities. Gases such as oxides of nitrogen (NOx) are produced during the combustion of fossil fuels in the inte...

The Influence of PEG400 and Acetone on Polysulfone Membrane Morphology and Fouling Behaviour

Modification of polysulfone ultrafiltration membrane was conducted by blending polysulfone with PEG400 and acetone as additives. The influence of each additive on the resulted membrane morphology and fouling characterist...

Download PDF file
  • EP ID EP324061
  • DOI 10.5614/j.eng.technol.sci.2017.49.4.4
  • Views 107
  • Downloads 0

How To Cite

Abrar Muslim (2017). Cu(II) Ion Adsorption Using Activated Carbon Prepared from Pithecellobium Jiringa (Jengkol) Shells with Ultrasonic Assistance: Isotherm, Kinetic and Thermodynamic Studies. Journal of Engineering and Technological Sciences, 49(4), 472-490. https://europub.co.uk./articles/-A-324061