CuxTe背接触层对CdTe光伏器件性能的影响
Journal Title: Science Paper Online - Year 2009, Vol 4, Issue 4
Abstract
研究了由共蒸发制备出的CuTe多晶薄膜的性能及其对CdTe光伏器件性能的影响。研究表明,刚沉积的CuTe薄膜为非晶相,退火后,随着退火温度的升高,不同配比的样品有着不同程度的物相转变,其中Cu/Te为1∶1.44的薄膜多晶转变最为明显,结晶度较高。以CuTe结构为主相的CuxTe薄膜作为背接触层电池,性能改善不显著,转换效率随膜厚的增加呈递减趋势;以Cu1.44Te结构为主相的CuxTe薄膜作为背接触电池,转换效率有极大提升,在膜厚40 nm处电池呈现最高转换效率;Cu2Te为背接触主相的电池相对于Cu1.44Te为背接触主相的电池,器件性能略有下降,但优于CuTe为背接触主相的电池。
Authors and Affiliations
Huijin Song, Jiagui Zheng, Lianghuan Feng
Experimental research on catalytic hydrogenation and esterification of light fraction of bio-oil
Distilled bio-oil with a certain mount of glycerol could divide bio-oil into two groups (light fraction and heavy fraction). Due to the different character of the two groups, it is a reasonable way to upgrading them resp...
Influence of temperature on the synthesis of block copolypeptide templated silica
By using synthetic block copolypeptide Phe20-b-PBLG50 with the phenyl groups in both segments as a template, anilino-methyl triethoxy silane (AMTS) as an intermedium and benzyl ammine as catalyst, nanoporous silica with...
The system of PCI data communication based on PCI9054
The performances and characteristics of the PCI9054, a typical PCI Bus I/O chip, are introduced in this paper. The characteristics of the WDM driver are analyzed. In order to implement a high speed data communication sys...
一类含中立项的非线性系统的复合抗干扰控制方法
针对一类含中立项的非线性系统,提出一种基于干扰观测器设计和H∞控制的复合抗干扰控制方法。将输入通道中的干扰信号表示为1个动态子系统,可以涵盖常值、谐波等信号。被控对象和干扰子系统都含有参数和结构不确定性。基于线性矩阵不等式,...
Modelling the precipitation of Nb(C, N) on dislocations<br /> in micro-alloyed steels<br />
A physically based mathematical model was established for prediction of flows stress, recrystallization and precipitation during thermo-mechanical processing (TMCP). It contains several interactional submodels for calcul...