Cycle Time Reduction Studies in Threading
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
Cycle time reduction is one of the critical aspects for achieving successful production of products. Prompt delivery, high quality of products have now become the significant factors for customer satisfaction. The various methods of programming in CNC systems ensure machine ability, but at the same time optimization and increase in productivity are to be enhanced. Various programming methods in manufacturing of threads were studied in this research work. The cycle times of three different work piece materials during the G76 threading cycle were noted. Then, we proposed G92 cycle of threading to reduce the cycle time. The new process enabled variable depth of cut, less number of passes resulting in cycle time and it is easy to use. The work was practically implemented on a CNC lathe machine and the data related to the experiments were recorded. This method was applied to 10 other work pieces, wherein it was noted that for all types of threads manufactured, a considerable amount of time is being saved and the productivity was increased marginally.
Authors and Affiliations
K. PALAKSHA REDDY, DEEPAK KUMAR, R. VENKATRAMAN, V. VISHWESHVAR
Keywords
Related Articles
- EP ID EP347099
- DOI 10.24247/ijmperdapr201816
- Views 78
- Downloads 0
Study of Raw Materials with the Aim of Obtaining Ceramic Filler and Heat- Insulating and Structural Wall Ceramics
The article presents the results of a comprehensive study of the chemical and mineralogical composition and the physical and mechanical properties of raw materials in the form of granulated blast furnace slag used at the...
Fabrication of Aluminium 6061- SiC-Al2O3 MMC and HMMC by Strir Casting Technique and Comparing the Mechanical Properties
Aluminum alloys are extensively used in aerospace and automobile industries owing to their low density and good mechanical properties, superior corrosion resistance and wear, low thermal coefficient of expansion as compa...
Rationalization of Exhaust System Mounting Brackets for Buses and Trucks
Computer-aided engineering (CAE) in Product Design Cycle CAE tools are very widely used in the automotive industry. Their use has enabled the automakers to reduce product development cost and time while improving the saf...
EVALUATION OF HARDNESS AND CORROSSION BEHAVIOUR OF Al 7075∕TiB2 ∕ Cr2O3 COMPOSITE
Aluminium composite is an attractive material for using in corrossive environment. Many studies have been conducted on corrossion rate in Aluminium composites. In this work Aluminium 7075 composite is reinforced with TiB...
Investigation of Hot Corrosion Behaviour of Uncoated and WC-17co Coated Samples in Aggressive Molten Salt Environment
Hot corrosion is usually a significant issue in power plant’s boilers. The alloys and metals get corroded, once exposed to high temperature corrosion in air, or in actual boiler environment in power plants. In order to p...