Data on Evaluation of the Corrosion Inhibition Effect of L-alpha-aminoisocaproate on High Carbon Steel Corrosion in Dilute Acid Media
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 4
Abstract
Corrosion inhibition performance of l-alpha-aminoisocaproate on high carbon steel in 1 M HCl solution has been studied by weight loss measurement, open circuit potential measurement, optical microscopy and ATF-FTIR spectral analysis. The results showed the inhibition performance of l-alpha-aminoisocaproate is time dependent attaining an optimal value of 85.88 % at 5.63 % l-alpha-aminoisocaproate concentration (highest concentration) after 288 h of exposure. The corrosion potential plots of the high carbon steel at 0.91 % (lowest concentration) and 5.63 % l-alpha-aminoisocaproate concentration were more electropositive than the plots at 0% l-alpha-aminoisocaproate concentration due to the effective inhibition performance of l-alpha-aminoisocaproate in counteracting the oxidation of the carbon steel in the presence of chloride anions. Identified functional groups of alcohols, phenols, primary and secondary amines and amides, carboxylic acids, alkynes, aromatics, alkenes and alkanes consisting of O–H stretch, free hydroxyl, H–bonded, N–H stretch, –C(triple bond)C–H: C–H stretch, C–H stretch and =C–H stretch bonds where responsible for the corrosion inhibition. The optical morphology of the carbon steel after 7200 s of exposure in the acid solution without l-alpha-aminoisocaproate was severely corroded in contrast to the morphology of the steel in the presence of l-alpha-aminoisocaproate which underwent minor deterioration due to the time dependent action of the inhibitor.
Authors and Affiliations
Roland Tolulope LOTO, Cleophas Akintoye LOTO
Keywords
Related Articles
- EP ID EP674918
- DOI 10.5755/j01.ms.25.4.21347
- Views 50
- Downloads 0
The Reactions of Carbon Monoxide Catalytic Oxidation on Ti and Zr-embedded Graphene, a DFT Study
Density functional theory (DFT) calculations have been performed to explore the mechanistic aspects of the catalytic oxidation of CO over Ti and Zr-embedded graphene. The present results show that the title reactions sta...
Microstructure and Magnetic Studies of La1-xSrxFeO3 Nano Particles Fabricated by the Citrate Sol-Gel Method
The paper reports the use the sol-gel auto-combustion method for the preparation of nanocrystalline La1-xSrxFeO3 (x = 00.7). The physical and chemical properties, microstructure, morphology and magnetic properties of th...
Grain Growth Model of Ultra-Fine Grain AZ80 Magnesium Alloy Multi-Directionally Forged During the Isothermal Heating Process
This paper takes the ultra-fine grain AZ80 magnesium alloy multi-directionally forged as the research object. We observe its heating behavior at 673 K with an optical microscope, analyze the grain size distribution, and...
Sound Absorption Property of Polyurethane Foam with Polyethylene Fiber
Flexible polyurethane (PU) foams with varying polyethylene fiber contents were synthesized to improve their acoustic performances. The purpose of this study was to investigate the effects of different polyethylene fiber...
The Effects of Ink Presence on Mechanical, Physical, Morphological and Thermal Properties of Office and Newspaper Fiber-Polypropylene Composites
In this study the effects of ink (offset and toner) presence on the mechanical, physical, morphological and thermal properties of newspaper- and office paper fiber-plastic composites were investigated. Printed and unprin...