Definition of energy efficient law of mechanical impact in vibratory stress relief of metal parts
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 1
Abstract
<p>The study is based on the method of vibratory stress relief, which is used to reduce the residual stresses in cast and welded parts, and is an alternative to thermal deformation methods, because it is unpretentious to the mass, shape and dimensions of the part.</p><p>Vibratory stress relief is usually carried out using unbalance electromechanical systems, which are simple in design of the power section and control system. In such systems, processing occurs simultaneously at only one resonant frequency. The workpiece, as a rule, is characterized by several resonant frequencies that have a tendency to shift to the low-frequency region during the implementation of the vibration effect. The technological process of sequential processing at each variable resonant frequency is rather time-consuming and not efficient in terms of the cost of electrical energy. In order to reduce the cost of time and energy, this study proposes the use of the most advanced processing methods at several resonant frequencies. Based on the algorithms of sequential vibratory stress relief at several resonant frequencies of the part and their changes towards low ones, it was proposed to carry out processing by a polyharmonic perturbing force in a limited frequency band. This effect has a bandwidth that contains all the possible frequencies of the part where vibratory stress relief occurs. Such an effect can be realized with the help of an electrodynamic linear motor as an executive body. The advantage of an electrodynamic linear motor is the proportionality of the generated force to the current supplied to the moving conductor and its repetition in form.</p>By means of mathematical modeling for the selected example, it was found that narrowing the frequency range in the low-frequency region by 5 times reduces energy costs by more than 4,000 times as compared with the broadband law of mechanical action on a part. A theoretically determined energy-efficient law can be software-implemented in control systems for electrodynamic linear motors that implement vibratory stress relief
Authors and Affiliations
Oleksii Sheremet, Mykola Ivchenkov, Olena Ivchenkova, Kateryna Sheremet
Keywords
Related Articles
- EP ID EP666266
- DOI 10.15587/1729-4061.2019.163697
- Views 62
- Downloads 0
Determining electrical losses of the traction drive of electric train based on a synchronous motor with excitation from permanent magnets
<p>We have studied a traction drive based on the synchronous motor with excitation from permanent magnets for its electrical losses. A simulation model of the traction drive is synthesized, which employs the algorithm of...
Analysis of quality of grain shortbreads for biological activity and medicalbiological assessment
<p class="a">Quality control of new speltbased grain crispbreads with the addition of plant additives by the biological activity and medicobiological assessment was examined and analyzed. It was found that plant additi...
Research into structure formation and properties of the fiberreinforced aerated concrete obtained by the nonautoclaved hardening
<p>We have investigated the influence of the ratio cement:fly-ash and the temperature of mixing water on the properties of aerated concrete mixes and aerated concrete. It was established that the rational cement-fly ash...
Research of a microwave radiometer for monitoring of internal temperature of biological tissues
<p>Currently, there is growing interest among specialists in the use of non-invasive dose-free technologies for diagnosis and monitoring treatment of various diseases. Microwave radiometry enables non-invasive detection...
DEVELOPMENT OF THE METHOD FOR REDUCING A MODEL TO THE NONDIMENSIONALIZED FORM
<p>We proposed the method that makes it possible to transform a mathematical model into the nondimensionalized form with a less number of nondimensionalized magnitudes, than it is prescribed by the Pi-theorem (in English...