DEFINITION OF THE GEAR’S GEOMETRY IN THE PLANETARY CYCLOIDAL TRANSMISSION
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2014, Vol 2014, Issue 82
Abstract
In the paper, the design and operation of the planetary cycloidal transmission have been discussed. The transmission is a synthesis of the planetary and the straight-line mechanism. The planetary mechanism is made of a planetary gear set with rollers, which is critical for the proper work of the transmission. Its basic and most important element is the planetary cycloidal gear. Influence of the parameters determining the cycloidal profile of the gear on the gear’s geometry and the forces has been presented. The straight-line mechanism carrying the motion from the driving onto the driven unit of the transmission is made of the pins and bushes located in the holes of the planetary gears. The influence of the number and geometry of the elements on the forces and occuring in the holes of the planetary gears has been presented. Therefore, the properly defined geometry of the gear and of the material of which the gear is made is crucial for the safe operation of the planetary cycloidal transmission.
Authors and Affiliations
Sławomir BEDNARCZYK
Keywords
Related Articles
- EP ID EP141866
- DOI -
- Views 45
- Downloads 0
MODELING 3D CAD AND RAPID PROTOTYPING THE PRESENTER PLANETARY GEAR
This paper presents a methodology for modeling and prototyping presentation of the planetary gear. Shown is the way of modeling hybrid transmission gear teeth. The first step is to develop a hybrid modeling the geometry...
ANALYTICAL SUGGESTION OF STRESS ANALYSIS ON FATIGUE IN CONTACT OF THE CYCLOIDAL - VASCULAR GEARING SYSTEM
This paper describes the proposal of design strength calculations of the cycloidal gear on fatigue in contact. It forms the first part of the full suggestion of stress analysis cycloidal gear. Another part will include a...
THE APPLICATION OF DETERMINATION METHOD OF DYNAMIC PROPERTIES OF TRACK SUSPENSION IN LABVIEW
The article presents the results of simulation tests, which aim was to validate the method of determining the damping characteristics of the suspension vehicle. The developed method was used for the implementation of the...
REGULATIONS IN FORCE ON THE ROADS OF KINGDOM OF POLAND IN THE CONSTITUTIONAL ERA
The article analyzes law enforcement legislation in force on the roads of Kingdom of Poland in the period between 1815 and 1830. The general description of these regulations was mostly concerning characterics, protection...
Oczekiwania zamawiającego w związku z realizacją umowy na kontrolę bezpieczeństwa w lotnictwie cywilnym
Po 18 marca 2013 r. zarządzający lotniskami zobowiązani są do przejęcia od Straży Granicznej zadań związanych z kontrolą bezpieczeństwa osób, bagażu, ładunków i przesyłek. Kontrola ta powinna być wykonywana z zachowaniem...