DEFORMATIONS AND FRACTURE OF COATING-SUBSTRATE SYSTEMS UNDER CONTACT LOAD
Journal Title: Tribologia - Year 2010, Vol 231, Issue 3
Abstract
Thin coatings are particularly applied to machine elements and tools working in contact. Theoretical solution of contact for coated systems is still not available, because of the difference in elastic and plastic properties of the surface layer and substrate, its interface properties, and residual stresses. Load bearing capacity of coatingsubstrate systems can be found from indentation experiments by transforming the load-depth indentation diagram to stress-strain diagram. The author depicts a complete procedure for this transformation. In the article, considerations about the deformations and failure of coating-substrate system were presented. Analyses were based on MES modelling and spherical microindentation results. TiN coatings on X6Cr13 steel substrates were under consideration. Critical loads leading to plastic deformation of steel substrate and coating fracture have been evaluated. Determination of these parameters allows one to make a deformation and fracture map for the tested system.<br/><br/>
Authors and Affiliations
Marcin Kot
Keywords
Related Articles
- EP ID EP517281
- DOI -
- Views 55
- Downloads 0
EVALUATION OF ELECTRON BEAM IRRADIATION EFFECTIVENESS IN VIEW OF INCREASING WEAR RESISTANCE OF GUR 1020 AND GUR 1050 POLYETHYLENES USED FOR ENDOPROSTHESIS CUPS
Radiation modification was conducted in order to increase the resistance of GUR 1020 and GUR 1050 polyethylenes to plastic deformation and abrasive wear. Electron irradiation of 26-156 kGy dose was applied. It was determ...
Analiza naprężeń w ceramicznych elementach tocznych
Materiały ceramiczne od kilkunastu lat znajdują coraz większe zastosowanie w technice. Wynika to z charakterystycznych właściwości materiałów ceramicznych takich, jak duża twardość, odporność na korozję, możliwość stosow...
WEAR RESISTANCE CHARACTERISTICS OF THERMO-CHEMICALLY TREATED STRUCTURAL STEELS
The article presents results of investigations of wear resistance by friction, employing the “3 cylinder – cone” method, of selected structural steels subjected to given thermo-chemical treatment, i.e. nitriding, carburi...
INVESTIGATIONS OF THE PROCESS OF KINETIC FRICTION IN FRICTIONAL PAIRS CAST IRON–STEEL
The paper presents tribological tests of the pair cast iron-steel. The structure of the test stand and measurement equipment is presented. The method of sample preparation and experiments are described. The original proc...
Propozycja metodyki wyznaczania wartości parametrów testów dla metody ball-cratering
W artykule przedstawiono propozycję metodyki wyznaczania wartości parametrów (obciążenia, prędkości obrotowej, drogi tarcia minimalnej i maksymalnej) metody ball-cratering opracowanej na potrzeby wyznaczenia współczynnik...