Design and Analysis of Vehicle Front Axle
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
A hub is a focal shaft for a turning wheel. On wheeled vehicles, the centre might be settled to the wheels, pivoting with them, or resolved to its environment, with the wheels turning around the hub. The axles serve to transmit driving torque to the bike, and in addition to keeping up the position of the wheels with respect to each other and the vehicle body. The axles in a framework should likewise bear the heaviness of the vehicle in addition to any payload. The front hub pillar is one of the significant parts of vehicle suspension framework. It houses the controlling get together too. Around 35 to 40 percent of the aggregate vehicle weight is taken up by the front pivot. Subsequently, the legitimate outline of the front pivot bar is to a high degree critical. In present research work plan of the front axle for Ashok Leyland, 1612 Comet substantial business vehicle was finished. The approach in this venture has partitioned into two stages. In the initial step, the front pivot was outlined by diagnostic strategy. For this, the vehicle determinations, its gross weight and payload limit to discover the burdens and diversion in the shaft has been utilised. In the second step front pivot were displayed in NX-CAD and coincided in HYPERMESH programming module. The coincided model was explained in ANSYS programming. The FE results were a contrasted and scientific plan.
Authors and Affiliations
PONSHANMUGAKUMAR A, RAJAVEL R
Keywords
Related Articles
- EP ID EP280249
- DOI 10.24247/ijmperdfeb201884
- Views 77
- Downloads 0
Comparing the Effect of Heat Treatment and Plasma-Nitriding on Corrosion Resistance of Ni-B-CNT Electroless Coating with Different CNT Concentration on Aisi 4340 Steel
The aims of the work to study the resistance of corrosion and the hardness of plasma-nitrating and heat treatment of coatings with electroless Ni-B-CNT. Various concentration of CNT range, (0, 0.35 and 0.7)g/L in Ni-B-CN...
Design and Manufacturing of Missile Long Shell Component by CNC Turn-Mill Centre
The main objective of this paper work is to design and manufacture critical component on CNC TURN MILL CENTRE. In this generation of part programme and implementing the same project consists of various operations that ar...
Experimental Investigation of Thermal Efficiency of Boiling Pot with Modified Surface Geometry
The research investigates the feasibility of a boiling pot with modified bottom surface as an efficient way compared to the boiling pot with a flat bottom. The effects of multiple vertical tubes along with modified botto...
The Investigation of Performance & Emission Characteristics of Diesel Engine by Dual Fuel (Bio Diesel + Bio Gas)
The examinations have been centered around finding the fuel that would be versatile to the current engine developments and that would meet the criteria in regards to sustainability, environment and unwavering quality of...
Corrosion Fatigue of Welded Joints in Marine and Naval Structures: A Review
Throughout the service life, marine/ naval structures experience environmental loading which cause cyclic stress variations in their structural members. These variations can cause fatigue cracking in welded structural de...