Design and Development of Microstrip Sensor with Triple Frequency for Determination of Rice Grains Moisture Content
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 5
Abstract
The micro strip moisture sensor is designed and developed with triple frequency, for determination of rice grain moisture content at 4.9GHz, 6.7GHz and 8GHz, with good return loss, as well as good bandwidth. The numerically and experimentally analyzed data using moisture sensor was for dry rice as well as wet rice. The proposed antenna is designed with substrate εr = 4.3, h =0.038mm, tan δ = 0.001, as well as the parameters length and width are 10mm and radius is 2.1mm, simulated by CST software and measuring by the vector network analyzer (Model No. N9925A). The proposed design is useful for agricultural field, for determining the moisture content as well as low cost, small size, easy to fabricate, accuracy, less time consuming.
Authors and Affiliations
Sweety Jain, Pankaj Kumar Mishra, Vandana Vikas Thakare
Keywords
Related Articles
- EP ID EP245171
- DOI -
- Views 90
- Downloads 0
THE POWER FACTOR CORRECTION IMPROVEMENT FOR A SINGLE PHASE AC/DC CONVERTER USING AN ENABLING WINDOW CONTROL
With the rapid development in the power electronics devices, DC power supplies are the wide range of application, including residential, commercial, and aerospace and traction system and SMPS. Normally, the conventional...
DESIGN AND ANALYSIS OF INTELLIGENT QUADROCOPTER TO AVOID THE OBSTACLES
The goal of this project is to create an intelligent quadrocopter to lift and fly by avoiding the obstacle in semi- autonomous flight to move from one place to other places. Quadrocopter is a platform that has four prope...
Design and Simulation of Connecting Rods with Several Test Casesusing Al Alloys and High Tensile Steel
The connecting rods designed recently are made from cast iron and carbon steel, which possess less tensile strength, toughness and durability. To improve such concern, this work aims in designing and analyzing the connec...
COMPUTATIONAL AERODYNAMIC PERFORMANCE STUDY OF A MODERN BLENDED WING BODY AIRPLANE CONFIGURATION
In the present commercial air transport scenario, efficient, economically and attractive configurations are urgently needed. Studies have shown remarkable performance improvements for the Blended-Wing-Body (BWB) over con...
The Restoration of Main Turbine Barring Gear Stoppage Issue in Thermal Power Station
Barring gear (or "turning gear") is the mechanism providing to rotate the Turbine Generator shaft at a very low speed after unit stoppages. Once the unit is "tripped" (i.e., the steam inlet valve is closing), the turbine...