Design and Fabrication of Car Exaust Muffler
Journal Title: Bonfring International Journal of Industrial Engineering and Management Science - Year 2018, Vol 8, Issue 2
Abstract
IC engines are one of the major sources of noise pollution. Mufflers are generally found with exhaust system. After the combustion the high intensity gas pressure through the muffler chamber and some of the gases reflected again passes through the combustion chamber it is called back pressure. It creates vacuum pressure in combustion chamber and decreases the engine performance. Reduction of weight, increasing the capability of noise absorption from the muffler with minimal back pressure can increase the performance of the engine. The objective of this study is to optimize noise level of engine and reduce back pressure. This project mainly targets on designing a muffler to reduce the noise and back pressure. Based on new muffler design parameters, a model is fabricated and tested.
Authors and Affiliations
Ajaykanth A, Aravinth G, Bharath C, Gokulnath G, Govindaraj R
Keywords
Related Articles
- EP ID EP404802
- DOI 10.9756/BIJIEMS.8363
- Views 125
- Downloads 0
Evaluation of Thermocyclic Oxidation Behavior of HVOF Sprayed WC-CrC-Ni Coatings
In the present study, the WC-CrC-Ni powder is HVOF sprayed on three different Fe-based steels namely SA213-T22, MDN-310 and SUPERFER 800H. Oxidation studies have been conducted on the coated as well as uncoated specimens...
Removal of Air Containing Tri Ethyl Amine (Tea) Using Vapor Phase Biofilter Packed With Wood Chips and Rice Husk
Mixed bacterial strains named as AGR/IICT/1-5B was isolated from the active sludge of ETP of a polymerization industry. Strains AGR/IICT/1-5B was primarily identified as 3 gram positive and 2 gram negative bacteria. Thes...
Design and Fabrication of Car Exaust Muffler
IC engines are one of the major sources of noise pollution. Mufflers are generally found with exhaust system. After the combustion the high intensity gas pressure through the muffler chamber and some of the gases reflect...
Design of Shunt Active Power Filter with Fuzzy Logic Control for Mitigating Harmonics
In this paper Shunt Active Power Filter (SAPF) with Fuzzy Logic Controller (FLC) is modeled and tested. The instantaneous reactive power theory is used for extracting the reference compensating current. A fuzzy logic con...
Influence of Powder and Paste on SCC Using Recycled Concrete Aggregate
The use of recycled concrete aggregate is an important issue for preserving the natural resources, protecting the environment, saving of energy and for sustainable development. In this study, a unique simple mixture prop...