Design and Fabrication of Metal Strip Cutting Machine

Abstract

Metal cutting is the basic process in any steel industries, ship building and bridges. Usually the industries cut the metal manually by using chop saw. It takes lot of time to measure the required length of the metal strip to be cut, there is no operator safety and the operator feels fatigue which leads to the loss of productivity. In order to overcome this issue there is a need of automatic metal strip cutting machine. This paper explains the design and construction of an automated metal strip cutting machine controlled by an Arduino. It automatically feeds the metal strip by two friction rollers to the cutting zone and also the length of the metal strip is taken care by a limit switch at the end which is adjustable according to the input length. There is an abrasive cutter which starts when limit switch is hit by the strip. Once the strip is cut and falls the limit switch is released and the strip is again fed. This process is continued until required number of strip required is counted by the limit switch.

Authors and Affiliations

Vinayak N Kulkarni, Mahammadarif Mulla, Anand Shankar, Prateek Moad, Mahipal Rajpurohit

Keywords

Related Articles

Stochastic Model to Find the Testosterone Therapy on Functional Capacity in CHF Patients Using Stochastic Analysis

Heart failure is a serious cardiovascular condition leading to life threatening events, poor prognosis, and degradation of quality of life. According to the present evidences suggesting association between low testoster...

slugPerformance optimized of MIMO transmission link

Wireless communication using Multiple-Input Multiple-Output (MIMO) links has emerged as one of the most significant breakthroughs in modern communications because of the huge capacity and reliability gains promised even...

Dressing of Structural Cracks Using Bio Concrete

Microbiology induced cracks remediation technique is a methods that has been proved beyond doubt of its efficiency. The review of literature carried out in this area indicates that the work related to quantification of...

The Divide & Conquer Technique Used In the Analysis and Design of Algorithms

Some sorting algorithms are simple and spontaneous, such as the bubble sort. Others, such as the quick sort are enormously complex, but produce superfast results. Some sorting algorithm work on less number of elements,...

slugDesign and analysis of chassis frame of TATA 2516TC

Automotive chassis is an important part of an automobile. The chassis serves as a frame work for supporting the body and different parts of the automobile. Also, it should be rigid enough to withstand the shock, twist,...

Download PDF file
  • EP ID EP24407
  • DOI -
  • Views 306
  • Downloads 10

How To Cite

Vinayak N Kulkarni, Mahammadarif Mulla, Anand Shankar, Prateek Moad, Mahipal Rajpurohit (2017). Design and Fabrication of Metal Strip Cutting Machine. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 5(6), -. https://europub.co.uk./articles/-A-24407