Design and implementation of FPGA control unit for solar Application
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 6
Abstract
Designing photovoltaic systems to maximize the output power Maximum Power Point Tracking (MPPT) is used. The new MPPT system is developed, using DC-DC converter. The design of FPGA control unit which includes the power circuit and a MPPT circuit with a buck boost circuit. The voltage divider circuit is used to send the constant voltage to the battery from the solar input. The ADC is used to convert the input analog signal from the solar panel to digital signal. Pulse width modulation technique is employed in this paper to give low total harmonic distortion with output voltage and frequency control. The qualitative performance parameters of the PWM technique are mathematically analyzed. The result shows that the voltage supply will be constant to the battery. The PWM is coded in VHDL and the design has been implemented in ALTERA CYCLONE board which requires 25mA for the start of execution. The board is powered by 12V DC supply by using a step down transformer.
Authors and Affiliations
V. Sahana, Dr. M. Jagadeeswari
Keywords
Related Articles
- EP ID EP22238
- DOI -
- Views 245
- Downloads 3
Comparative Study of BIS and ACI Method of Concrete Mix Design using Alccofine as a Partial Replacement of Cement
This paper presents a comparison of BIS, and ACI methods of concrete mix design, combining the test results of these methods. The M40 and M50 grades of concrete have been designed for comparison using alccofine. In thi...
FTP Based Honeypot Implementation Model for Network Security
In this paper, we have presented Network security using Honeypot technique that pretends to have one or more network vulnerabilities that a blackhat is looking for. But actually it does not have those vulnerabilities. I...
An Opinion Mining By Manhattan Clustering Using Decision Tree Feature Selection
In present era Opinion mining plays a major character in text mining applications, and people are more depend on the web for many actions like purchasing, investment, business markings, etc. These applications led to a...
Finite Element Analysis of Bond Behaviour Between Concrete and Steel Reinforcing Bar by Pull Out
Bond strength is very important in reinforced concrete and it is necessary to create suitable bond between steel and surrounding concrete. Bond strength is the means by which load is transferred between steel and concre...
Image Compression using Variable Size 2D DCT with FPGA platform
The discrete cosine transform (DCT) is basically known as compressing mpeg and jpeg images. The basic reason why it is widely used all over is because of its simplicity and easily computed for faster execution. A lot of...