Design and Optimization of Pressurized Toroidal LPG Fuel Tanks with Variable Section
Journal Title: HIDRAULICA - Year 2018, Vol 0, Issue 1
Abstract
This study addresses the design and optimization of the pressurized toroidal LPG fuel tanks with variable section used in automotive industry based on the finite element analysis (FEA) approaches, to model both thermal and mechanical processing conditions. To define specific key performance indicators and to determine the optimal form of toroidal LPG fuel tank with the minimum stress state and linear deformation was applied a mathematical and mechanical foundation for the design and optimization. Computer aided investigations are carried out using 3D models done in the AutoCAD Autodesk 2017 software, which were imported to SolidWorks 2017 software for analysis and can offer an important reference for the design of toroidal LPG fuel tanks.
Authors and Affiliations
Mihai TALU, Stefan TALU
Keywords
Related Articles
- EP ID EP483066
- DOI -
- Views 218
- Downloads 0
A New Solution for Water Aeration
The paper presents a new solution of water aeration, namely: the introduction of compressed air into the water transport pipes. This eliminates those reservoirs, pumps, decanters, ponds, etc., which pursue the interventi...
The 3D Geometry Reconstruction of a Scaled Axial Blade by Photogrammetry
The paper illustrates the Reverse Engineering of an axial blade geometry, who was scanned through Photogrammetry technique and processed with the following software packages: Agisoft Photoscan and Geomagic Design X; the...
Argumentation of the Optimal Hydrodynamic Profile of Blades of the Flow Microhydrostation Rotor’s
Insistent searches of authors have led to the design and licensing of some advanced technical solutions for outflow micro hydroelectric power plants. They are based on the hydrodynamic effect, generated by the hydrodynam...
Studying the Influence of River Works on River Flow Regime with 1-D Hydraulic Modelling
The one-dimensional (1-D) hydraulic models are the most adequate for river modelling flow. This case study involves the rehabilitation of the CFR bridge, km 38 + 389, line 116 DII Simeria - Petrosani at Ruşor town, Huned...
Theoretical and Experimental Research on the Technological Process of Spraying and Dynamics of the Motorized Agricultural Platform
This article presents the results of a research developed by INOE2000 - IHP, as well as a functional model of a motorized agricultural platform used for spraying in horticulture. This is part of a complex crop monitoring...