Design and Simulation of Single-Phase Three-Level, Four-Level and Five-Level Inverter Fed Asynchronous Motor Drive with Diode Clamped Topology
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2014, Vol 12, Issue 1
Abstract
This paper deals with study of single-phase three-level, four-level and five-level inverter fed asynchronous motor drive. Both three-level, four-level and five-level inverters are realized by diode clamped inverter topology. The poor quality of voltage and current of a convectional inverter fed asynchronous motor is due to presence of harmonic contents and hence there is significant level of energy losses. The multilevel inverter is used to reduce the harmonic contents. The inverter with a large number of steps can generate a high quality voltage waveform. The higher inverter levels can be modulated by comparing a sinusoidal reference signal and multiple triangular carrier signals by the means of pulse width modulation technique. The simulation of single-phase three-level, four-level and five-level inverter fed asynchronous motor model is done using 〖MATLAB/SIMULINK〗^R (The math Works, Natick, Massachusetts, USA). The Fast Fourier Transform (FFT) spectrums of the outputs are analyzed to study the reduction in the harmonic contents.
Authors and Affiliations
Gerald Diyike , Aniekan offiong , Daniel Nnadi C
Keywords
Related Articles
- EP ID EP94456
- DOI -
- Views 107
- Downloads 0
An enhanced QoS Architecture based Framework for Ranking of Cloud Services
With the rapid growth of cloud computing, many organizations such as Amazon, IBM and HP started to offer cloud services to various consumers. From the customer’s point of view, it is very difficult to choose which...
Comparative Study of Pre Engineered and Conventional Industrial Building
Long span, Column free structures are the most essential in any type of industrial structures and Pre Engineered Buildings (PEB) fulfil this requirement along with reduced time and cost as compared to conventional struct...
Detection of Node Clones in Wireless Sensor Network Using Detection Protocols
Wireless sensor networks consist of hundreds to thousands of sensor nodes and are widely used in civilian and security applications. One of the serious physical attacks faced by the wireless sensor network is node clone...
Experimental Analysis of 2.7 m2 Scheffler Reflector and Formulation of a Model
The performance of 2.7 m2 Scheffler reflector has been studied. Scheffler Reflector is parabolic dish collector designed to collect energy from sunlight. In this System storage vessel was installed at focus point . Vesse...
Efficient Appraisal of Cloud Computing Through Comprehensive Confrontation of Security Issues and Discrepancies Involved
Cloud computing is a new computational paradigm that an innovative business model allows organizations to adopt without prior IT investments well. Despite the potential benefits derived from the cloud computing,...