Design Improvement Study For cBN Coated Cutting Body Used In Piston Ring Cutting Process
Journal Title: American journal of Engineering Research - Year 2018, Vol 7, Issue 2
Abstract
In this study, the quality of non-alloy, non-heat treated, gray cast iron workpieces with lamellar graphite was compared with the cutter body with cubic boron nitride (cBN) coated with different hot work steel tool designs.As an alternative to the current single piece cutter body design, a multi-piece modular cutter body has been designed and used.Cutting process is done with INDEX brand automatic CNC cutting machine. Cutting heights and parallelism of the produced samples were measured with GOETZE special design ring height measuring device and surface roughnesses were measured with MAHR brand MARSURF XR1 model surface roughness meter.It has been found that two different body designs also produce similar results on product quality.No significant difference was observed between the ring height, parallelismand surface roughness values.This result shows that the newly designed multi-piece modular cutter body can be used while maintaining the current product quality.In this way, by using the multi-piece modular cutter body, it will be able to reduce setup time, cutter tool scrap rates and cut off all product dimensions with minimum stock level.
Authors and Affiliations
Varan Güneş, Nejat Yıldırım Sarı
Keywords
Related Articles
- EP ID EP396460
- DOI -
- Views 84
- Downloads 0
Applications Of Differential Transform Method To Integral Equations
In this article, the Differential Transform Method is applied for solving integral equations. The approximate solution of the integral equation is calculated in the form of series with easily computable components. This...
Improvement on the Design,Construction and Testing of Hammer Mill.
This paper presents the result of work carried out in improving the design, construction and testing of hammer mill by addressing some lapses associated with the design and construction of the existing ones. These improv...
Design, Development and Performance Evaluation of an Anaerobic Plant
The need for safe and cost effective alternative energy source is a major challenge facing developing economies globally. This study explored the design, development and performance evaluation of a cost effective anaerob...
Automated Solar Panel With Web Monitoring
Automated solar panel produce more electrical energy instead of existing system. The goal of this paper is to design an automatic sun light tracking system, which can locate position of the sun. The tracking system will...
Effect of Temperature and Microstructure on the Corrosion Behaviour of a Low Carbon Dual Phase Steel
This work assesses the impact of intercritical annealing temperature and microstructure on the corrosion performance of duplex microstructure steel developed from 0.23%C steel in 0.1M HCl solution. After normalizing, the...