DESIGN OF A FLEXIBLE DEFOLIATOR FOR MAIZE STRAW
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
This article contains a flexible defoliator for maize straw, the device including material platform, feeding mechanism, guide mechanism, the first to defoliator institutions, the second to defoliator institutions, output structure and straw crushed leaves collection agencies. The feeding mechanism consists of two rollers at both ends, which are connected by spring or elastic plate and box body. The first defoliator is made of rubber with a spiral gear wheel with a steel pointed structure, which is connected with the box body by spring or elastic plate. The second defoliator is the roller for internal screw mounting steel wire; The organization is located on the same line; Both the guide mechanism and the defoliator are provided with the material outlet and the straw scrap recovery device. In this article, the design structure of the device is compact, which solves the problem that the straw leaves are not sufficient, and the flexible leaves of straw are truly realized
Authors and Affiliations
Hou Zhesheng, Bao Penglai, Wang Meng
Keywords
Related Articles
- EP ID EP414870
- DOI 10.26480/icnmim.01.2018.405.407
- Views 54
- Downloads 0
PREPARATION AND STUDY OF PROPERTIES OF DI(TRIMETHYLOLPROPANE) BIPHOSPHATE ETHANOLAMINE SALT
A new type of halogen-free flame retardant has been synthesized with raw materials of Di(trimethylolpropane) and phosphorus oxychloride, and the influence of the raw material ratio, reaction temperature and reaction time...
ANTIOXIDANT ACTIVITY OF POLYSACCHARIDE FROM CORN SILK IN VITRO
Study on antioxidant activity of the polysaccharide from corn silk in vitro. Methods:Use clearing thiobarbituric acid method, removing 2,2 ‘- azino-bis (3 – ethylbenzothiazoline-6 – sulfonic acid) diazonium salt (ABTS) r...
POLYSACCHARIDE EXTRACTED FROM ARMILLARIA MELLEA BY ULTRASONIC -ASSISTED METHOD
Polysaccharides extracted from Armillaria Mellea by Ultrasonic assisted method was studied in this paper. Single factor and orthogonal experiments were used to determine the optimum extraction conditions. The content of...
CONTROL ON PRODUCTION COST AND QUALITY OF CARBON FIBRE PRECURSOR
In the production of carbon fibre industry, oiling of carbon fibre precursor can impart fibre smoothness, antistatic property, and bundling property, and also allows the precursors to have sufficient high temperature res...
STUDY ON EXTRACTION OF CORN STRAW AND CORN CELLULOSE AND THE DEGRADATION PERFORMANCE OF REGENERATED FILM
In this paper, corn straw and corn cob are sifted into outer layer and inner layer, respectively. Then, the cellulose was separated by acid and alkali method, dissolved in ionic liquid AmimCl, cellulose film was regenera...