Design Of A Neural Network Controller To Enhance The Control Of Flights In Bad Weather Conditions
Journal Title: American journal of Engineering Research - Year 2018, Vol 7, Issue 10
Abstract
Adaptive control is a control method used by a controller which must be adaptable to the controlled system in relation to the parameters which may vary, or are initially uncertain. This is concerned with the control laws changing themselves. The foundation of adaptive control is parameter estimation, which is a branch of system identification. An Artificial Neural Network is used in adaptive control. It is an information processing paradigm inspired by the way the biological nervous systems, such as the brain, process information. This is why its adaptability in flight control processes has continued to attract increasing attention. It is able to answer “what if” questions as required and expected. This has been aptly demonstrated such that to the question, “what if weather is bad?” the answer becomes, “do not land,” automatically. Neural Networks as used here demonstrated adaptability in enhancing flight control in bad weather conditions.
Authors and Affiliations
Eze, MarcelNduka,, Prof. Eneh I. I. ,, Ekpenyong, . , EkpenyongEkpo (Ph. D)
Keywords
Related Articles
- EP ID EP398563
- DOI -
- Views 64
- Downloads 0
Mathematical Modeling of the Effect of Different Parameters on Spring Back in Sheet Metal Formability Process
In the study, bending process was performed on the AISI304 sheet metals at different thicknesses (2 mm, 3 mm, 4 mm, and 5 mm) and different punch type radii (R2 mm, R4 mm, R6 mm, and R8 mm) by using air V bending techniq...
Formation of Ybus Martix By Using Direct Inspection MethodFor “12”Bus Power System.
Power flow analysis is the backbone of power system analysis and design. They are necessary for planning, operation, economic scheduling and exchange of power between utilities. The principal information of power flow an...
The Effect of Holding Time and Solidification Rate on Porosity of A356
During casting of aluminum alloys, the final microstructure and mechanical properties are strongly affected by the ambient atmosphere. The liquid aluminum reacts with water vapour to form aluminum oxide on the surface an...
Optimization of Pid Controler In Temperature Control System Processes Pasteurization of Milk
Pasteurization is one of the heating process done on fresh milk so it becomes a product that has a longer shelf life. By controlling the temperature in the pasteurization process is expected to be able to kill pathogenic...
Predictive Model for TPH Degradation in Soil Amended with Spent Mushroom
This study involved the applicability of mathematical model in predicting the amount of residual TPH in contaminated soil. The performances of various concentrations of spent mushroom, mixed with constant weight of TPH c...