Design of a Typical Offshore Transportation System for External Corrosion
Journal Title: American journal of Engineering Research - Year 2016, Vol 5, Issue 7
Abstract
The external corrosion assessment of a typical offshore transportation system has been presented. Cathodic protection design was carried out for the pipeline and it was found that a bracelet square weld on anode of L = 195𝑚𝑚, G =101.6 𝑚𝑚, Thickness = 70𝑚𝑚, M = 149.75 𝑘𝑔, ∅ = 1.2235𝑚𝑚, N = 128 and s = 300𝑚was found to be satisfactory in providing secondary/ backup protection for the 48inchespipeline in the external environment provided. The external anticorrosion coating selected is the Three layer polyethylene (3LPE) coating based on the dimensions of the pipeline and the design temperature of 80℃. The 3LPE external corrosioncoating will comprise of an inner layer fusion bond epoxy, a middle layer: adhesive and an outer layer: High density polyethylene (HDPE) base with additives.
Authors and Affiliations
Shittu, A. A. 1 ,, Kara F. 2, ,Jain R. K. 3, Ibrahim T. K. 4
Keywords
Related Articles
- EP ID EP403374
- DOI -
- Views 59
- Downloads 0
Analysis of Corona Effect on Transmission Line
The effect of Corona on high voltage transmission line is one of the cause of power loss in power system and this is uneconomical and undesirable. The study of Corona and factors responsible for the loss is investigated...
Evaluating Suitable Application of De-Icing Materials for Winter Maintenance Practices
This study evaluated the differences in estimated and actual use of de-icing materials across regions in South Korea. We use this information to identify areas where there appears to be a misfit between estimated and act...
Invariant Stabilization Algorithms in a Control System with Rotating Operating Device
The publication suggests how to significantly improve the spacecraft center of mass movement stabilization accuracy in the active phases of trajectory correction during interplanetary and transfer flights, which in some...
Correlation Of The Oxide-Reduction Potential And Study Of The Bacterial Population During The Copper Sulfide Bioleaching
The interrelation of bacterial population variables and oxide-reduction potential in the bioleaching of sulphided minerals was studied by bacterial strain of AciditiobacilusFerrooxidans, isolated from acid mine effluent,...
Design of Three Stages Continuous Anaerobic Digestion (AD) Plant
The AD system is extensively acceptable as an efficient process for treatment and utilization of organic waste because it has proven to be promising method for waste recycling and energy generation. However, the major pr...