Design of Automatic Transfer Switch ACOS with Human Machine Interface Monitoring System in Shipboard Application
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2016, Vol 1, Issue 1
Abstract
This paper concern about design ACOS with PLC system. The supply of electricity will move from the main generator to the battery when the main generator lost one phase, and the power supply will switch to the emergency generator when the voltage in accordance with the emergency generator working voltage AC electrical equipment on board is 380VAC. Electricity supply shall not move directly from the emergency generator to the main generator but to the battery first to prevent damage to the AC electrical equipment on board. Transport time for the system for 30 seconds ACOS equipment in accordance with the ICC and SOLAS regulations which require the transfer of under 45 seconds. ACOS equipment can be used in real conditions on the ship because it has phase failure, under voltage and over voltage protection and a relay as an indication for the transfer of command power supply automatically.
Authors and Affiliations
Sardono Sarwito, Indra Ranu Kusuma, Boy Hendra Waramory
Keywords
Related Articles
- EP ID EP219644
- DOI 10.12962/j25481479.v1i1.1388
- Views 393
- Downloads 0
Design of Catamaran Propulsion System with Demihull Distance Variation on Hospital Ship
Various problems faced by health services in the area of remote islands based on survey data Ministry of Health, that limited human resources in health and treatment facilities, as well as the difficult geographical cond...
Study on Safety of Navigation using Automatic Identification System for Marine Traffic Area Case Study: Malacca Straits
International Maritime Organization (IMO) has recommended the implementation of Automatic Identification System (AIS) to improve the safety of navigation at marine traffic area. Based on regulation, IMO requires AIS to b...
Development of Load Characteristic for The Main Engine and Its PLC Compatible Preparation in Cooperation with The Water Brake as The Generator
Water brake can be used in any application where a load brake is required on a rotational load. In the engine industry, dynamometer is used in conjunction with a power source and instrumentation to determine engine HP, T...
Analysis of Influence of Masks Flow on Intake Valve of Gas and Oil Fuel Engine Based Simulation
Turbulent flow in the combustion chamber affects the combustion process which also affects the engine performance. The turbulent flow intensity can increase the duration of combustion, but too much turbulent turbulent fl...
Automatic Stacking Crane Prototype using Microcontroller Arduino Mega 2560
The port is one of the supporting infrastructures for sea-transportation carrying goods and passengers. The function of port is important in supporting the transportation system to develop economic, social, and eduaction...