DESIGN OF AUTOMATION INSTRUMENT EXPERIMENT SYSTEM MONITORING SYSTEM BASED ON WINCC

Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1

Abstract

On the basis of expounding and analyzing the experimental requirements of the flow level instrument system, temperature instrument system and pressure instrument system, the automatic instrument experimental monitoring system establishes the control scheme of the instrument experiment system. The WinCC configuration software is used to design the picture drawing, dynamic connection, history library establishment, picture drawing, history curve and alarm, etc., so as to realize the data detection and record of the liquid level and flow. At the same time, when the data has problems, it can alarm in time, complete the dynamic scanning and analysis of the data, and provide a certain theoretical basis for the stable operation of the experiment in operation.

Authors and Affiliations

Hu Xiaoyan, Meng Yanan, Zhai Yupeng

Keywords

Related Articles

APPLICATION PROPERTIES OF ETHYL BENZOATE: ENVIRONMENTAL-FRIENDLY DYEING CARRIER FOR POLYESTER FIBER

This paper uses ethyl benzoate emulsion as dyeing carrier to low temperature dyeing of polyester fiber, inspected the effect of benzyl benzoate on the application properties of polyester fabrics and disperse dyes. Using...

EFFECT OF SINTERING TEMPERATURE AND TIME ON STRUCTURAL AND DIELECTRIC PROPERTIES OF TB-DOPED BATIO3 CERAMICS

Ba1−x/2Ti1−x/2TbxO3 (x = 0.05) ceramics (BTTb5) were prepared at Ts = 1400 °C for t = 6‒24 h and at Ts = 1300‒1480 °C for t = 24 h using the cold-pressing ceramic processing technique. All of BTTb5 ceramics satisfy EIA X...

CONTROL ON PRODUCTION COST AND QUALITY OF CARBON FIBRE PRECURSOR

In the production of carbon fibre industry, oiling of carbon fibre precursor can impart fibre smoothness, antistatic property, and bundling property, and also allows the precursors to have sufficient high temperature res...

THEORETICAL STUDIES ON THE STRUCTURES AND SPECTROSCOPIC PROPERTIES OF IR COMPLEXES WITH THE BIPYRIDYL-PHENYLENEDIAMINE LIGAND

The phosphorescent iridium(III) complexes (N^C)2Ir(bpy-D) (bpy-D = 4-(N-(2-amino-5- methoxy- phenyl)aminomethyl)-4’-methyl-2,2’-bipyridine: N^C = F-ppy(1), ppy(2), pq(3) , pqe(4); F-ppy = 2-(2,4-difluorophenyl)pyridine,...

CORN COB POLYMER FLOCCULANT PREPARATION METHOD AND ITS APPLICATION IN ORGANIC WASTE WATER TREATMENT

In this paper, the corn cob was modified to prepare cellulose xanthogen with flocculation. A comparative experiment was conducted on the flocculating adsorption effect of the finished product. Experiments show the best e...

Download PDF file
  • EP ID EP413425
  • DOI 10.26480/icnmim.01.2018.40.42
  • Views 68
  • Downloads 0

How To Cite

Hu Xiaoyan, Meng Yanan, Zhai Yupeng (2018). DESIGN OF AUTOMATION INSTRUMENT EXPERIMENT SYSTEM MONITORING SYSTEM BASED ON WINCC. Topics in Chemical & Material Engineering (TCME), 1(1), 40-42. https://europub.co.uk./articles/-A-413425