DESIGN OF FLYING SHEAR DEVICE AND ALGORITHM BASED ON MOTION CONTROL SYSTEM

Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1

Abstract

The flying shear device and algorithm design using the SIEMENS S7-300 series PLC SINAMIC SI20 motion controller and the motion control system based on the realization of the servo motor with high precision and high stability control are no traction test data under the condition of Kun and disc cutter by inertia compensation and the control algorithm of PID system, analysis of the causes of the control process and material tension linear velocity error analysis. The system analysis and algorithm design can be used for reference in industrial flying shear and motion control design.

Authors and Affiliations

Liu Qi, Li Shuo, Wang Ying, Liang Kai, Mo Huili

Keywords

Related Articles

ONLINE SIMULATION OF SHELL-AND-TUBE HEAT EXCHANGER BASED ON CONFIGURATION SOFTWARE

Taking the shell-and-tube heat exchanger as the research object, based on the conservation of energy, the dynamic mathematical model of the heat exchanger is established through the mechanism analysis method. Using confi...

SYNTHESIS AND CHARACTERIZATION OF EPOXY-MODIFIED WATERBORNE UNSATURATED POLYESTER AND THEIR USE IN FIBER SIZING AGENTS

Epoxy-Modified Waterborne unsaturated Polyester (WUP) were synthesized by phthalic anhydride, dipropylene glycol, maleic anhydride, epoxy resin, methyl tetrahydro phthalic anhydride and triethylamine. The chemical struct...

DEFECT CHEMISTRY AND LOW-LOSS CHARACTERISTICS OF ND-DOPED BATIO3 DIELECTRIC CERAMICS

(Ba1–xNdx)Ti1–x/4O3 (x = 0.03‒0.06) (BNT) ceramics with a single-phase perovskite structure were prepared using the mixed-oxides method. The structure, microstructure, point defects, defect chemistry, and dielectric prop...

DEVELOPMENT OF REAL-TIME SIMULATION PLATFORM FOR TANK LEVEL CONTROL SYSTEM BASED ON WINCC

This paper uses WinCC configuration software and based on the mathematical model of Coupled-Tank, which writes the program code through C script, solving the tank differential equation by Euler method, and uses the incre...

POLYSACCHARIDE DETERMINATION IN CORN SILK WITH 3,5-DINITROSALICY LIC ACID COLORIMETRY

Contents of reducing sugars in crude polysaccharides from corn silk were measured by 3,5-dinitrosalicylic acid (DNS) colorimetry with incident wavelength at 492 nm, amount of DNS = 1.5 mL, coloration temperature at 90 °C...

Download PDF file
  • EP ID EP414783
  • DOI 10.26480/icnmim.01.2018.257.259
  • Views 46
  • Downloads 0

How To Cite

Liu Qi, Li Shuo, Wang Ying, Liang Kai, Mo Huili (2018). DESIGN OF FLYING SHEAR DEVICE AND ALGORITHM BASED ON MOTION CONTROL SYSTEM. Topics in Chemical & Material Engineering (TCME), 1(1), 257-259. https://europub.co.uk./articles/-A-414783