Design of PID Controller for Automatic Voltage Regulator System through Kidney-inspired Algorithm
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2019, Vol 7, Issue 2
Abstract
This study presents a new design method for determining the best proportional-integral-derivative (PID) controller parameters (Kp, Ki and Kd) of an automatic voltage regulator (AVR) system using kidney-inspired algorithm (KA) for the first time. KA technique has high quality solution ability, good computational efficiency and fast convergence characteristics. The design problem of the proposed PID controller is defined as an optimization problem and KA technique is utilized to find the controller gains of Kp, Ki and Kd. The superiority of the optimized PID controller with KA technique over Ziegler-Nichols (ZN) classical tuning method and some modern heuristic optimization algorithms based controllers is inspected via transient response analysis to achieve an efficient AVR system. To evaluate the stability of the related power system tuned by KA technique, pole/zero map analysis and Bode plot are performed. Afterwards, robustness analysis is also carried out to check the performance of the proposed controller in the AVR system. The numerical simulation results verify that KA technique has an excellent tuning capability and is more efficient in improving the step response of the AVR system than the other existing methods.
Authors and Affiliations
Serdar EKİNCİ, Ayşen DEMİRÖREN, H. Lale ZEYNELGİL, Serhat KAYA
Keywords
Related Articles
- EP ID EP605877
- DOI 10.29109/gujsc.516424
- Views 101
- Downloads 0
The Effects of Shot Peening parameters on the subsurface properties of AA7075 T6 aluminum alloy
Shot peening (SP) is an important mechanical surface treatment widely used to improve the fatigue life of mechanical components operating under dynamic loads which have been specifically used in automotive and aerospace...
Digital PID Temperature Controlled Laminator Test Kit Design and Production for Small & Medium Scale Photovoltaic Module Production
In this study, laminator design and production are realized for small & medium scale photovoltaic (PV) module production. The reliability of the energy to be supplied by the PV modules and / or the system is possible by...
The Performance Evaluation of Solar Control Methods in Buildings: A Multi-Objective Approach
In this study, a tool and method that support the analysis of different solar control methods in buildings through a genetic optimization algorithm are proposed. First, eight scenarios of different glazing alternatives a...
The Effect of Heat Treatments on Alloying of Pre-mixed Al + 4.5 wt. % Cu Powders
In this study, 4.5 wt. % Cu powder was added to Al powder and mixed for 45 minutes to produce premixed metal powders. Premixed powders were compacted by cold pressing at 20 MPa. After that these samples were pressed at 5...
Implementation of a Sample Test System for an Autonomous Wind Energy System
Many studies have been made in terms of mechanical and electrical related to using of convert the wind energy into electrical energy. The mechanical studies are generally wind turbine and special type machine designs. Th...