Design of the laboratory bench for a hydrovolumetric-mechanical transmission of the tracked tractor
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 7
Abstract
<p>Double-flow hydrovolumetric mechanical transmissions is an advanced technical solution that aims to increase productivity, improve efficiency and convenience of control over wheeled and tracked tractors. Their arrangement renders considerable potential for their modernization and makes it possible to introduce recuperation systems that would enhance their performance efficiency coefficient to the level of mechanical transmissions. Innovativeness of these transmissions and the lack of a sufficient number of prototypes largely hinder their implementation in production.</p><p>A large number of possible HT circuits necessitates the creation of an original bench-prototype for each of them. In order to solve this task, we proposed in this paper a kinematic circuit of the universal testing laboratory bench for HT of the tracked tractor. Its design makes it possible to study HT circuits of the type with a differential «at the output», the type with a differential «at the input» for both wheeled and tracked vehicles, and to simulate the process of work of a hydrovolumetric turning mechanism. Introduction of electric generators to the design makes it possible to estimate in practice the effectiveness of recuperation of kinetic energy at braking, as well as parasite power that circulates in the closed circuit of HT during acceleration and braking.</p><p>We give quasi-static characteristics of basic HT circuits that are simulated at the laboratory bench. The results were obtained based on an improved mathematical model that makes it possible to determine the volumetric, mechanical, and full performance efficiency coefficient of separate hydraulic machines in the direct and reverse flows of power and special working regions of hydraulic gear. For the transmissions with a differential «at the output», maximal performance efficiency coefficient reaches 83 %, indicating the proper selection of gear ratios and standard size of hydraulic machines.</p><p>The results obtained are of interest for industrial and design organizations, specializing in the development of transmissions for transportation vehicles. Employing the developed bench would significantly reduce the time between designing and industrial implementation. There is a possibility to confirm experimentally the efficiency and high technical-economic indicators of the proposed transmission. Such a bench will make it possible for scientific institutions to discover new phenomena and processes in HT, systematize the influence of gear ratios of reducers, planetary mechanisms, and their number, on the working processes in HT.</p>
Authors and Affiliations
Nikolay Mittsel
Keywords
Related Articles
- EP ID EP527898
- DOI 10.15587/1729-4061.2018.126548
- Views 63
- Downloads 0
Development of the information system for forecasting collision between birds and wind farms
<p>The information system for processing the results of observations of birds on the territory of a wind farm was created. The information system ensures the storage and processing of the monitoring results, conducting s...
Determining the most dangerous loading application point for asphalt-concrete layers on a rigid base
<p>Operating conditions of asphalt-concrete layers on cement-concrete slabs differ significantly from other structural solutions. Practical road construction applies the insufficiently developed methods for calculating t...
Improvement of safety of autonomous electrical installations by implementing a method for calculating the electrolytic grounding electrodes parameters
We have solved the task of safety improvement in the grounding process of autonomous mobile electrical installations. Existing procedures for the calculation of normalized resistance of grounding electrodes in electric i...
Detection of regularities in the parameters of the atebgabor method for biometric image filtration
<p>The study has developed a new image filtering method based on Ateb-Gabor. The method involves the well-known Gabor filter that helps convert images with clear contours. Therefore, this method is applicable to biometri...
A method of designing of torque-flow pump impeller with curvilinear blade profile
<p>The research is devoted to energy efficiency increasing of a “Turo” type torque-flow pump by improving its impeller. This allows minimizing the total pump installation life cycle cost as a result of reducing the costs...