DESIGN OF ULTRA HIGH VACUUM (UHV) SYSTEM TO EVALUATE OUTGASSING RATE OF THE MATERIALS TO ASSES THEIR UHV COMPATIBILITY
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 4, Issue 7
Abstract
Stainless steel and copper are very suitable structural metals for fabrication of UHV vessels. Indus-1 (450MeV) and Indus-2(2.5GeV) are electron storage rings dedicated for their application as a synchrotron radiation sources. In accelerators the residual gas particles limit the e-beam performance and its life time. The main factor deciding the UHV compatibility of any vacuum component is the specific outgassing rate, at room temperature and specifically at the operating temperature. To evaluate the outgassing rate of the various materials to be used in UHV, an experimental set-up made up of stainless steel has been designed, developed and tested. A thin cylindrical shell under external pressure, like a column, may collapse either by yield or by buckling. Collapse by yield is caused by stresses in the shell reaching the yield point of the material. Collapse by buckling is caused by buckling of the shell at stresses which may be considerably below the yield point. The shell strength i.e. the thickness of the considered experimental set – up chambers was designed on the basis of ASME code section VIII/Div-1, II/part-D. Orifice was designed as per AVS standard. The buckling analysis, deflection analysis and stress analysis were also performed on the experimental setup chambers using ANSYS software and results were found up to the mark. This paper elaborates design calculations for chamber and orifice, outgassing- rate measurements and the ANSYS results.
Authors and Affiliations
Ibrahim Hussain
Keywords
Related Articles
- EP ID EP148273
- DOI -
- Views 66
- Downloads 0
MOTOR LUBRICANT OIL DURATION RATE MODELING
The paper is trying to give information about motor lubricant oil its grades according to relatively international standard. The paper suggested that due to poor oil personnel experience in Sudan lubricant oil choo...
Mobile Printing using near Field Communication
In Over the last year there have been countless developments related to new mobile phones, tablets, and apps for personal and business use alike. While the majority of these developments have nothing to do with pr...
LOW COST FLYING BOT USED FOR AERIAL PHOTOGRAPHY AND FACE DETECTION
This article deals with designing and fabrication of a robot which is capable of flying and performs several tasks with ease & speed. A lot of manpower & energy is used for aerial photography from a far distance....
An Efficient Image Fusion Method For Fusion of Low Resolution Infrared And
Due to the fast development of digital image processing the growth of feature extraction of images which leads to the development of image fusion. The process of co retaining salient features from each image with...
DIGITAL INDIA SCHEME TO CLEAN INDIA CAMPAIGN E-WASTE MANAGEMENT
In India, the quantity of “e-waste” or electronic waste has now become a major problem. Disposal of e-waste is an emerging global environmental and public health issue, as this waste has become the most rapidly gr...