Designing the organoplastics based on aromatic polyamide, study of their operational properties and applicability
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 12
Abstract
<p>Polymeric composite materials that are reinforced with organic fibers are characterized by great possibilities in terms of improving the durability of friction nodes in machines and mechanisms. These composites successfully compete with non-ferrous metals and their alloys and, in some cases, outperform polymeric and metallic analogs by their properties. In this regard, we have studied the influence of the organic fiber lola on operational characteristics of the aromatic polyamide phenylone, brand C-1, and on possibilities to apply the developed polymeric composite materials.</p><p>Experimental studies have confirmed that the reinforcement of phenylone with the organic fiber lola in the amount of 5–15 % by weight improves its operational characteristics. This is predetermined by the arrangement of the supramolecular structure of the basic polymer due to the introduction of organic fiber. Thus, at the interface " phenylone-filler" one clearly observes the transformation of the binder's globular structure into fibrillar one. That leads to a positive effect: there is an increase in destruction energy (by 1.5 times) and chemical resistance (by 1.1–1.36 at aging in 5 % HCl, and by 1.27–1.6 ‒ in 10 % HCl). It should be noted that the developed organoplastics are stable at a temperature of 673 K, while the starting polymer begins to destroy intensively at 400 K. Specifically, it was determined that at a further increase in the mass fraction of the filler these indicators deteriorate, due to insufficient adhesion between the filler and the binder.</p>Using the organic fiber lola (in the amount of 5–15 % by weight) makes it possible to obtain composites with improved operational characteristics: enhanced thermal and chemical parameters, high resistance to impact loads. Thus, there is reason to argue about the prospects of using the fiber lola as a filler for composites. Organoplastic with an optimum fiber content (15 % by weight) is recommended for manufacturing the components of tribological nodes for modern equipment instead of non-ferrous metals and their alloys due to sufficiently high operational properties.
Authors and Affiliations
Anna-Mariia Tomina, Yekaterina Yeriomina, Viktor Terenin
Keywords
Related Articles
- EP ID EP667091
- DOI 10.15587/1729-4061.2019.176698
- Views 78
- Downloads 0
Oxidation of 4brometylbenzene by ozone in acetic acid
<p>The kinetics and the mechanism of ozonation of 4-bromethylbenzene in acetic acid was studied. The constants of the rate of reaction of ozone with 4-bromethylbenzene and 4-bromacetophenone at different temperatures wer...
Development of algorithms for improving the accuracy and performance speed of a functional analogtodigital converter
<p>This paper presents results of the study into the functional analog-to-digital conversion with a replaceable logarithm base. In known analog-to-digital converters, an increase in speed leads to a decrease in accuracy...
Revealing patterns in the aggregation and deposition kinetics of the solid phase in drilling wastewater
<p>We have investigated the influence of the concentration of the solid phase of drilling wastewater on a change in the sedimentation rate of the solid phase at aggregation when applying a physical-chemical method of wat...
Research into effectiveness of cavitation cleaning of wastewater of a fatandoil plant from organic and biological contamination in the presence of various gases
<p>The use of cavitation technologies for the processes of cleaning wastewater from a fat-and-oil plant is one of the promising methods for enhancing water quality indicators. The supply of gases of different nature, suc...
Determination of parameters of the stochastic inventory management system in the conditions of economically-based shortage
<p>A methodical approach to determining the optimal parameters of a stochastic inventory management system in the context of an economically justified deficit that allows responding quickly to fluctuations in demand and...