Destruction zone near the tip of interfacial crack at a prevailing tensile loading
Journal Title: Вісник Тернопільського національного технічного університету - Year 2016, Vol 81, Issue 1
Abstract
Under the plane strain conditions at the prevailing tensile loading by Wiener-Hopf method the solutions of problems about the calculation of a small-scale destruction zone in the pre-fracture zone part, which is adjacent to the interface crack tip, located on a flat interface of two different materials, taking into account and ignoring the contact of the lips near the tip have been found. The influence of the elastic characteristics of joining materials and loading configurations on the parameters of the destruction zone has been investigated.
Authors and Affiliations
Mykhailo Volodymyrovych Dudyk
Keywords
Related Articles
- EP ID EP249152
- DOI -
- Views 61
- Downloads 0
Calculation of the ignition temperature of composite materials under high-temperature synthesis
Energy saving technology of the high-temperature synthesis is one of the competitive processes of modern production. The high-temperature synthesis is the kind of combustion, which produced valuable solids by moving wave...
Method of the quadratic interpolation of the discrete rhythm function of the cyclical signal with a defined segment structure
The article considers the problem of determining the rhythm function of some continuous cyclic function by the means of interpolation of the embedded in it discrete rhythm function, which is defined by the segment struct...
Computer modelling characteristics of ballast choke of the fluorescent lamp
Basing on the analysis of existing structures of the planar system induction coils authors proposed to fill the space between the turns of the coil by the ferromagnetic material. This design will increase the magnetic in...
Solution of the non-axisymmetric quasistatic thermoelasticity problem for multilayer cylinder with identical Lamé coefficients
The non-axisymmetric thermoelastisity state of the multilayer unlimited hollow cylinder with the identical Lame coefficients of layers under the action of internal and surface heat sources and non-uniform distribution of...
Investigation of characteristic of powder wire with the CUO/Al exothermic mixture
The paper the results of research is presented and the level of influence of the parameters of surfacing and the amount of exothermic mixture in the composition of self-shielding flux-cored wire on the deposition rate fa...