DETERMINATION OF OPTIMAL SIZES OF SENSORS MEMBRANE ELEMENTS BY MEASURING ELASTIC MODULES USING THE RESONANCE METHOD
Journal Title: Наукові праці ОНАЗ ім. О.С. Попова - Year 2017, Vol 1, Issue 2
Abstract
Introduction of the concept of the Internet of Things in telecommunication networks has caused a rapid number growth of new designs and technologies for manufacturing reliable sensors of physical quantities, in particular pressure and displacement sensors. In order to determine the optimal dimensions and rejection of unreliable working elements of membrane pressure and displacement sensors, the frequency dependence of natural transverse oscillations of biphasic steel plates on their length is investigated. The experimental frequencies values of plates of fixed thickness and of various lengths were determined by the resonance method. The measurement results were processed using the Spectra PLUS computer program. The analytical dependence of the disk natural oscillation frequency on the length for the fixed disk thickness is expressed by the exponential function. The theoretical values of the frequencies are well coordinated with the experimental data for plates 60-100 mm long. However, for lengths less than 30 mm, a significant discrepancy between the experimental and calculated data is observed. This can be explained by the difficulty of obtaining stable oscillation. The plates deformation by alternating bending decreases the disk natural oscillation frequency due to the appearance and development of residual damages in the forms of micropores and microcracks in the disks. It is proved by the direct observation over microstructures by means of electron-microscope investigation.
Authors and Affiliations
Viktor Gorbachov, S. N. Polyakov, N. A. Volchok, V. V. Lukashin, D. A. Dyachok
Keywords
Related Articles
- EP ID EP392971
- DOI -
- Views 118
- Downloads 0
RESEARCH OF THE EFFECT OF THE CHEMICAL COMPOSITION OF THE OPTICAL FIBER GLASS ON THE SIGNAL SPECIFIC CHROMATIC DISPERSION
The dependences of the specific chromatic dispersion of the signal on the working wavelength of the optical signal were analyzed for stepped optical fibers of cores and shells of various chemical compositions. For the st...
ОПРЕДЕЛЕНИЕ ПРОТЯЖЁННОСТИ АБОНЕНТСКИХ И СОЕДИНИТЕЛЬНЫХ ЛИНИЙ ПРИ ПРОЕКТИРОВАНИИ СЕТИ ДОСТУПА С УЧЁТОМ ОСОБЕННОСТЕЙ НАСЕЛЁННОГО ПУНКТА
Приведён ряд аналитических выражений, которые позволяют определить протяжённость абонентских и соединительных линий, а также объём строительства канализационных сооружений для их монтажа на основе сведений о количестве м...
NOVEL 2-12QAM MODULATION FORMAT
The 16 Quadrature Amplitude Modulation (16QAM) is the preferred modulation format for many communication and broadcasting standards. However, performance of the overall “practical” communication/ broadcasting systems emp...
ANALYTICAL DESCRIPTION OF NONLINEAR OBJECT WHEN MODELING SYSTEMS OF INFORMATION TRANSFER
The paper proposes an analytical tool in the form of a point interpolation method that allows describing transition processes in nonlinear objects taking into account the shape of the signals and the minimum number of di...
ОСОБЛИВОСТІ ПРОКЛАДАННЯ ТА НАДІЙНІСТЬ НОВИХ ТИПІВ ОПТИЧНИХ ВОЛОКОН
У статті розглянуто вимоги до надійності волоконно-оптичних ліній зв’язку при застосуванні на них технологій передавання, що використовують спектральне розділення каналів. Показано, що застосування таких технологій стави...