Determination of stresses and strains in the shaping structure under spatial load
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 7
Abstract
<p>The computational model of the machine – environment system, taking into account the mutual influence of the working body and compaction mixture was developed. It is based on the condition of determining the contact forces of interaction between the subsystems and estimation of the ratio of the time of action and time of wave propagation. This approach is new, since it takes into account the real relationship between the dynamic parameters of the machine and the environment and degree of interaction. The study and determination of stresses and strains in time confirmed the hypothesis of their significant influence on the process. A fundamentally new result was revealed, which consists in the fact that the transition process should take into account the determination of parameters and locations of vibrators. The laws of stress and strain variations during spatial oscillations of the shaping surface were established. Modes of natural oscillations of the system are implemented with higher oscillation amplitudes and correspondingly lower frequency. And this opens up a real opportunity to reduce the energy intensity of the vibration machine. Numerical values of stresses and the nature of their distribution in the shaping surface, depending on the angle of the instantaneous action of the external force of vibrators, the presence of bending and torsional oscillations were obtained.</p><p>So under the condition of two excitation forces, the points of application of which are displaced relative to each other by ½ of the length of the structure, placing the force application points symmetrically at a distance of ¼ of the size of the structure on both sides allowed obtaining cophased and anti-phase directions of stresses and acting external force.</p><p>In calculations of vibration machines using shaping surfaces, it was proposed to take into account output numerical values of the amplitude-frequency mode of the oscillation exciter. Practical recommendations for the rational design of sections of shaping structures were developed and technological parameters were determined. To construct such shaping structures, the installation sites for vibrators were determined. The results obtained can be successfully used in related processes, for example, in the mining industry, as active surfaces for ore transportation, for the transfer of suspensions and solutions in the chemical industry</p>
Authors and Affiliations
Ivan Nazarenko, Viktor Gaidaichuk, Oleg Dedov, Oleksandr Diachenko
Keywords
Related Articles
- EP ID EP528288
- DOI 10.15587/1729-4061.2018.147195
- Views 54
- Downloads 0
Obtaining the powder-like raw materials with the further research into properties of eggplant powders
<p>Results of the research into development of the advanced technological and technical solutions for the processing of eggplants are reported. The proposed technology resolves the task on the rational use of eggplants....
Modeling of reliability of logistic systems of urban freight transportation taking into account street congestion
<p>Mathematical formulation of the problem of forming urban freight transportation is performed. The structure of the system information model is developed, which takes into account material, energy and information flows...
Improvement of a discharge nozzle damping attachment to suppress fires of class D
<p>The software package COSMOSFloWorks has been used to study a discharge nozzle damping attachment. A procedure has been proposed to estimate the covering of surface with dimensions of 0.4×0.4 m by a fire-extinguishing...
Devising a procedure to choose optimal parameters for the electromechanical shock absorber for a subway car
<p>A procedure for determining basic estimation parameters has been devised for the proposed structure of the electromechanical shock absorber. The procedure is based on a simplified mathematical model for determining th...
Development of a technique for restoring the efficiency of film ITO/CdS/CdTe/Cu/Au SCs after degradation
<span lang="EN-US">A study into the influence of direct polarity on the output parameters of ITO/CdS/CdTe/Cu/Au solar cells (SC) has been conducted. We have experimentally registered the effect of an electric field of di...