Determination of the thermal time constant of the reinforced concrete building component
Journal Title: Bulletin of the Military University of Technology - Year 2017, Vol 66, Issue 2
Abstract
As a result of changes in the boundary conditions, a heat exchange in the building envelope is not always in a steady state. Heat fluxes penetrating through the wall may be several times greater than the steady state. Thus, the building can have a much higher demand for energy and requires the use of more powerful heater than it results from the standard calculation. This article dealt with estimating the length of the transient state after changing the boundary conditions. The protective celling plate of dimensions 35 m × 1 m and a thickness of 0.5 m has been analysed. The plate, on the one hand, is cooled in air at a temperature of 8.6°C, on the other hand is inside the shelter at 20°C. A period of cooling, based on the theoretical and numerical calculations, was obtained, then the differences were discussed and the conclusions drawn. Keywords: building, building physics, heat flows in building envelopes
Authors and Affiliations
Stefan Owczarek, Mariusz Owczarek
Models of diagnostic relations in a wheeled tractor
Modern wheeled tractors are equipped with new-generation electric and electronic systemswhich control the operation of actuator systems. Such solutions require an on-board computer foronline monitoring of functional perf...
Computer support services of contamination threats analysis and alarming in WAZkA system for Polish KSWSiA
The article outlines a concept for the system supporting analyses of threats related to contamination and alarming (WAZkA), for the purpose of the National System for Detection of Contamination and Alarming (Krajowy Syst...
Mobilne obiekty infrastruktury wojskowej dla zakwaterowania żołnierzy
Jednym z ważnych współczesnych problemów infrastruktury wojskowej jest budowa i eksploatacja mobilnych obiektów dla zakwaterowania żołnierzy SZ RP i sojuszniczych [13]. Zagadnienie to jest przedmiotem prac badawczych i k...
Termicznie przełączane kompozyty ciekłokrystaliczne
Zbadano właściwości termooptyczne kompozytów typu PDLC, zawierających nematyczne ciekłe kryształy w zakresie widzialnym oraz w bliskiej podczerwieni. Potwierdzono, że warstwa kompozytu może być przełączana, z zadowalając...
Właściwości połączeń spawanych stali wysokowytrzymałej wykonanych z wykorzystaniem technologii laserowej
Zastosowanie stali wysokowytrzymałych HSS (high strength steels) w konstrukcjach stalowych powoduje liczne korzyści, do których możemy zaliczyć obniżenie przekroju poprzecznego stosowanych profili powodującego ograniczen...