Determination of thermal and physical characteristics of dead pine wood thermal insulation products
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 10
Abstract
The studies allowed manufacturing dead pine wood thermal insulation materials for the arrangement of premises. Raw materials for their production are wood fibers formed as flat boards. The mechanisms of the thermal insulation process during energy transfer through the material, which makes it possible to influence this process are determined. It is proved that the processes of thermal insulation consist in reducing the porosity of material. So, with a decrease in material density, thermal conductivity decreases, and vice versa. Modeling of the heat transfer process in the swelling of the fireproof coating is carried out, temperature dependences of thermophysical coefficients are determined. Based on the obtained dependences, thermal conductivity for dead pine wood products, reaching 0.132 W/(m·K) is estimated. In case of adhesive bonding of wood products, it decreases to 0.121 W/(m∙K) and when creating wood wool thermal insulation boards it decreases to 0.079 W/(m∙K), respectively. Features of inhibition of the process of heat transfer to the adhesive bonded wood wool material are associated with the formation of pores. This is because in small pores there is no air movement, accompanied by heat transfer. Thermal conductivity of homogeneous material depends on density. So, with a decrease in the material density to 183 kg/m<sup>3</sup>, thermal conductivity decreases 1.67 times, and vice versa, when using the board, thermal conductivity decreases only 1.1 times. This allows confirming the compliance of the discovered real mechanism of thermal insulation with the revealed conditions for the formation of properties of the inorganic and organic-mineral bonded wood wool material, as well as practical attractiveness of low-quality wood. The latter, in particular, relate to determining the amount of the binder component. Thus, there is reason to argue about the possibility of directed regulation of the processes of formation of wood thermal insulation materials using wood wool and inorganic and organic-mineral binder, which can form a fire-retardant film on the material surface
Authors and Affiliations
Yuriy Tsapko, Denys Zavialov, Olga Bondarenko, Nataliia Marchenco, Serhiy Mazurchuk, Oleksandra Horbachova
Keywords
Related Articles
- EP ID EP666999
- DOI 10.15587/1729-4061.2019.175346
- Views 65
- Downloads 0
Devising a procedure for the synthesis of electromechanical systems with cascade-enabled fractional-order controllers and their study
An approach to the synthesis of automatic control circuits has been proposed, based on a fractional characteristic polynomial, which makes it possible to ensure the desired quality of a transition process under condition...
Development of graphicanalytical models for the software security testing algorithm
An analysis of one of the main types of software testing, namely security testing has been made. It was established that there are a number of specific features associated with the possibility of negative manipulation wi...
Quality assessment of control over the traction valve-inductor drive of a hybrid diesel locomotive
<p>We have studied the valve-inductor drive for its application as a traction motor in a hybrid locomotive. We identifying parameters of the valve-inductor engine and built its simulation model based on a Lagrange equati...
Theoretical research into spatial work of a steel-reinforced-concrete statically indeterminate combined structure
<p>The constructed mathematical model and the developed algorithm for spatial calculation of combined steel-reinforced-concrete truss systems make it possible to determine parameters of the stressed-strained state in the...
Designing adaptive PID controller non-sensitive to changes in aerodynamic characteristics of an unmanned aerial vehicle
The method of implementing an adaptive PID controller using a reference model of an unmanned aerial vehicle is presented. The unmanned aerial vehicle has a nonlinear characteristic and high sensitivity to external influe...