Determination of Wood Fractional Composition Effect on Gasification Process
Journal Title: Energy Engineering and Control Systems - Year 2016, Vol 2, Issue 1
Abstract
The heating value of synthesis gas derived as a result of the fuel gasification can vary depending on various factors. The main factors that affect the process of gasification is the fractional composition of wood; the amount of air fed to the gasification chamber; the height of the active layer and a series of other factors, dependent on fuel which is gasified and parameters of the gasifier. Any type of wood has to be to ground up for subsequent thermal processing. Depending on the production necessity, wood is ground up to technological chips of different fractions by chipping machines (also called wood chippers, shredder). The choice of chippers type depends on the need. Modern chipping machines allow making fine tuning of the source material by wood size. Considering the deficit and cost of energy carriers to the forefront using waste of wood chippers as fuel for gas-generator installations and solid fuel boilers.
Authors and Affiliations
Stepan Lys, Yosyph Mysak, Taras Kravets
Keywords
Related Articles
- EP ID EP256958
- DOI 10.23939/jeecs2016.01.005
- Views 87
- Downloads 0
Investigation of Sensor for Measurement of Rotation Angle of Sensitive Element in Rotational Paper Pulp Consistometer
This paper presents the results of theoretical and experimental testing of an optical rotation angle sensor of rotational paper pulp consistency meter. It is suggested that a specialized device consisting of two discs wi...
Selection of Functional Diagram of Air Multi-Compressor Control System
Compressed air generation systems are a necessary facility for most enterprises; they also belong to the most energy-consuming equipment category. Study of transients of these systems’ operation is a prerequisite for cre...
Physical Modeling of Thermal Processes of the Air Solar Collector with Flow Turbulators
The analysis of existing systems of solar air heating has been carried out. The physical model of the solar air collector (SAC) with additionally installed flow turbulators, which are located in the air channel of the so...
Energy Saving from Tap Water Home Treatment Devices
Water is the only liquid used in human eating which presents different production and transportation processes. All the alimentary liquids, in fact, need production and sanification processes in controlled environments a...
Methodical Framework of the Support and Decision-making System for the Collection and Disposal of Organic Raw Materials
Topical and important issue is the national problem of introduction of biomethane production and the Ukrainian gas transportation system. This problem can be addressed through the use of information technology based on t...