Determining strength indicators for the bearing structure of a covered wagon's body made from round pipes when transported by a railroad ferry
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 7
Abstract
Improving the efficiency of transportation process through international transport corridors promotes the development of interoperable systems. Successful functioning of the interoperability of transportation is possible at reliable and well-coordinated work of individual components. In this regard, it is necessary to introduce into service a new generation of rolling stock with improved techno-economic and performance indicators. We have designed a supporting structure of the covered wagon, whose special feature is that the elements of the body are made of round tubes; in order to ensure the reliability of its fastening to the deck of a rail ferry, the nodes for fastening chain couplers are arranged at the pivot beams. To refine the determination of indicators for the strength of the body of a covered wagon, we have investigated its dynamic loading under the most unfavorable estimation scheme ‒ angular displacements of the railroad ferry relative to its longitudinal axis (equivalent to lateral pitching oscillations in the dynamics of railroad cars). We have determined the maximum magnitude of accelerations using mathematical modeling of a railroad ferry oscillations with wagons placed on its decks, applying a second-order Lagrange method. Solving differential equations of a railroad ferry oscillations, with railroad cars on it, employed the Runge-Kutta method in the programming environment MathCad. When determining the total magnitude of acceleration acting on the body of a covered wagon when transported by a railroad ferry, we also accounted for the horizontal component of a free fall acceleration, predetermined by the tilt angle (heeling) of the railroad ferry. The resulting value for acceleration as a component of dynamic loading was taken into account while studying the strength of a load-bearing bodywork of the covered wagon. The calculation employed a finite element method in the programming environment CosmosWorks. To this end, we developed a model of strength of a load-bearing bodywork of the covered wagon made from round tubes when transported by a railroad ferry. It has been established that the maximum equivalent stresses do not exceed those permissible for the grade of steel used for metallic structures of the body and are about 280 MPa. We have determined a design service life of the node for fastening chain screeds at the body of a covered wagon when transported by a railroad ferry. Results of this research could be applied when designing railroad cars of the new generation with improved technoeconomic and performance indicators
Authors and Affiliations
Oleksij Fomin, Alyona Lovska, Vyacheslav Masliyev, Alina Tsymbaliuk, Oleksii Burlutski
Keywords
Related Articles
- EP ID EP666205
- DOI 10.15587/1729-4061.2019.154282
- Views 86
- Downloads 0
Development of the method for structural-parametric optimization in order to improve the efficiency of transition processes in periodic systems
<p>In order to get the most out of the enterprise’s operational processes, the operational processes of functional systems are optimized. However, in the process of optimization, controlled systems over a significant amo...
Mathematical model of obtaining a hydrocarbon fuel based on the fischertropsch pathway in a stationary layer of the cobaltbased catalyst
<p>Studying the kinetics of the Fischer-Tropsch process is a rather important task, since this process is very sensitive to the temperature mode, as well as to the characteristics of the catalyst. In addition, a given pr...
Development of new technological solutions for recovery of heavy nonferrous metals from technogenic waste of electroplating plants and sludge of water treatment systems
<p>In galvanic cakes and municipal wastewater sludge, there are significant amounts of heavy non-ferrous metals, which are classified as hazard class I ecotoxicants and are currently being disposed. The existing methods...
Results of research into efficiency of a flat solar air heliocollector with a wavy absorbing surface
<p>A new design of the air collector with the airtight and warmed casing and the absorber with the wavy surface that can be used as an additional heating element of the low-temperature heat source was developed. We estab...
DEVELOPMENT OF MATHEMATICAL MODELS OF GAS LEAKAGE AND ITS PROPAGATION IN ATMOSPHERIC AIR AT AN EMERGENCY GAS WELL GUSHING
The study tackles the development of new mathematical means for determining distribution in space and time of technogenic load on atmospheric air as a result of non-burning gas well gushing. To date, modeling is the only...