Determining the effective characteristics of a composite with hollow fiber at longitudinal elongation
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 7
Abstract
<p>When solving problems on the mechanics of composites, it is convenient to use a composite model in the form of a continuous homogeneous medium with effective constants, which adequately reflect its most essential characteristics. Modern engineering and construction commonly use the composites, reinforced with hollow fibers. Unknown for today are the analytical dependences for the effective elastic constants of such composite materials with transtropic components. The task on constructing such dependences is resolved in this paper.</p><p>We have derived analytical dependences for the effective longitudinal modulus of elasticity and the Poisson’s coefficient in the unidirectional fiber composite, consisting of a transtropic matrix and hollow fiber. The composite is simulated by a solid uniform transtropic material. The conditions for a perfect connection are satisfied at the interphase surfaces. In order to obtain the analytical dependences, we have solved two boundary problems: on the longitudinal elongation of a composite cylinder, whose components are the transtropic matrix and hollow fiber, and a solid homogeneous cylinder that models the transtropic composite. The application of conditions for displacements alignment and stresses, found by solving these problems, provided an opportunity to derive formulae for the effective longitudinal modulus of elasticity and Poisson’s coefficient. These formulae reflect the dependences of effective characteristics of a composite on elastic characteristics of the matrix, fibers, and volumetric shares of the fiber and the cavity inside it.</p><p>We have compared results of calculations using the formulae derived with the calculation results based on previously known ratios for the isotropic ratios. This comparison has shown that their relative deviation does not exceed one percent. Application of the obtained dependences makes it possible to design structures with elements made from the composite materials</p>
Authors and Affiliations
Serhii Homeniuk, Sergii Grebenyuk, Mykhailo Klimenko, Anastasia Stoliarova
Keywords
Related Articles
- EP ID EP528287
- DOI 10.15587/1729-4061.2018.143406
- Views 62
- Downloads 0
Construction of methods for determining the contours of objects on tonal aerospace images based on the ant algorithms
<p>A method has been proposed for determining contours of objects on tonal aerospace images based on ant algorithms. The method, in contrast to those already known, takes into consideration patterns in the image formatio...
Development of a miniature microwave radiothermograph for monitoring the internal brain temperature
<p>To improve efficiency of non-invasive monitoring of the internal brain temperature, a small-size single-channel microwave radiothermograph consisting of a miniature radiometer and a radiometric sensor based on a print...
Assessment of the stability of aquatic ecosystems development on the basis of indicators of the macrophytes fluctuating asymmetry
<p>In order to implement the provisions of the EU Water Framework Directive 2000/60/EU, the theoretical and methodological principles of applying the method of instantaneous biomonitoring of the stability of aquatic ecos...
Studying the effect of the combined technology on durability of the shafttype parts
<p>Restoration of shaft parts with extending their service life is an important reserve of development and growth of repair efficiency. Improvement of wear resistance and durability of parts of agricultural machinery is...
Estimation of fluctuations in the performance indicators of equipment that operates under conditions of unstable loading
Abstracts<p>The dynamic model of change in the performance indicators of sophisticated equipment was proposed. The proposed model consists of two parts. The first part concerns modeling of a random process of changes in...