Developing A Hexapod Walking Machine

Abstract

This project deals with the walking machines. A brief history and the evolution of the walking machines which are classified based on their legs, different walking mechanisms exists out of which Theo Jansen’s walking mechanism was considered as it has single degree of freedom, walking mechanism is theoretically simple and efficient. Vigorous endeavours were encountered in applying the mechanism and toiled in enhancing various parameters to redefine the stability of the model and improving the total efficiency of the model using an optimization technique which is Genetic Algorithm. The first part of this thesis deals with the basic introduction of the walking machines. Like the classification operation and advantages of the walking machines. The criteria’s for the adaption of Theo Jansen mechanism Over The Other mechanism are discussed. Secondly the problems encountered in the application of the mechanism to the prototype design, the implementation of the Genetic Algorithm and the code to optimize the mechanism were discussed with sample results are showcased. Thirdly Justification of the results that were obtained from the genetic algorithm is done using CAD software solid works. The various design parameters like the stresses developed due to various forces applied on the mechanism while walking are analyzed the stresses and strains on each link are evaluated Velocity and acceleration plots for each joint and legs are also plotted. A Prototype was developed to validate the Kinetic and kinematics models of the walking mechanism and the practical constraints that are encountered were discussed in the final part of the thesis. The thesis concludes by discussing the various aspects that need to be considered for the future prototypes based on the Theo Jansen mechanism and the core idea of building a scalable machine which can be used like a transport walking machine in rugged and harsh conditions.

Authors and Affiliations

Anil Kumar Devarapalli| PG Scholar, Dept of Mechanical Engineering, Prasiddha College of Engg & Tech, Amalapuram davanilkumar@gmail.com, P. Satish Reddy| Assoc. Professor, Dept of Mechanical Engineering, Prasiddha College of Engg & Tech, Amalapuram, N. Guru Murthy| Asst Professor, Dept of Mechanical Engineering, Prasiddha College of Engg & Tech, Amalapuram, murthy408@gmail.com, M Manoj| Asst Professor Dept of Mechanical Engineering, Prasiddha College of Engg & Tech, Amalapuram, mattamanoj13@gmail.com

Keywords

Related Articles

Scalable Coding of PRNG Encrypted Images

This paper proposes a unique scheme of scalable coding for PRNG encrypted images. In the encryption stage, the original pixel values are masked by a modulo-256 addition with pseudorandom numbers that are resulting fr...

Power Quality Improvement in 3P4W System Using Unified Power Quality Conditioner (UPQC) with P-Q Theory

Unified power quality conditioners (UPQCs) allow the mitigation of voltage and current disturbances that could affect sensitive electrical loads while compensating the load reactive power. Diverse control techniques...

Thermal Analysis of Exhaust Manifold Coating with High Temperature Resistant Materials

In IC engines exhaust system plays an important role in delivering the waste gases to a safe distance and also it helps in reducing the sound pollution and air pollution ,these exhaust systems ,mainly exhaust manifol...

Developing A Hexapod Walking Machine

This project deals with the walking machines. A brief history and the evolution of the walking machines which are classified based on their legs, different walking mechanisms exists out of which Theo Jansen’s walki...

A Novel Approach for O (1) Parallel Sorting Algorithm

Sorting is an algorithm of the most relevant operations performed on computers. In particular, it is a crucial tool when it comes to processing huge volumes of data into the memory. There are different types of sortin...

Download PDF file
  • EP ID EP16885
  • DOI -
  • Views 304
  • Downloads 6

How To Cite

Anil Kumar Devarapalli, P. Satish Reddy, N. Guru Murthy, M Manoj (2017). Developing A Hexapod Walking Machine. International Journal of Science Engineering and Advance Technology, 5(2), 214-221. https://europub.co.uk./articles/-A-16885