Development and evaluation of a targeted orchard sprayer using machine vision technology
Journal Title: Journal of Agricultural Machinery - Year 2016, Vol 6, Issue 2
Abstract
IntroductionIn conventional methods of spraying in orchards, the amount of pesticide sprayed, is not targeted. The pesticide consumption data indicates that the application rate of pesticide in greenhouses and orchards is more than required. Less than 30% of pesticide sprayed actually reaches nursery canopies while the rest are lost and wasted. Nowadays, variable rate spray applicators using intelligent control systems can greatly reduce pesticide use and off-target contamination of environment in nurseries and orchards. In this research a prototype orchard sprayer based on machine vision technology was developed and evaluated. This sprayer performs real-time spraying based on the tree canopy structure and its greenness extent which improves the efficiency of spraying operation in orchards. Materials and MethodsThe equipment used in this study comprised of three main parts generally: 1- Mechanical Equipment 2- Data collection and image processing system 3- Electronic control systemTwo booms were designed to support the spray nozzles and to provide flexibility in directing the spray nozzles to the target. The boom comprised two parts, the vertical part and inclined part. The vertical part of the boom was used to spray one side of the trees during forward movement of the tractor and inclined part of the boom was designed to spray the upper half of the tree canopy. Three nozzles were considered on each boom. On the vertical part of the boom, two nozzles were placed, whereas one other nozzle was mounted on the inclined part of the boom. To achieve different tree heights, the vertical part of the boom was able to slide up and down. Labview (version 2011) was used for real time image processing. Images were captured through RGB cameras mounted on a horizontal bar attached on top of the tractor to take images separately for each side of the sprayer. Images were captured from the top of the canopies looking downward. The triggering signal for actuating the solenoid valves was initially sent to the electronic control unit as the result of image processing. Electronic control unit was used to adjust the right time of spraying based on the signals received from the encoder to precisely spray the targeted tree. The distance between the camera and spraying nozzles was considered in the microcontroller program. The solenoid would be turned off and stop the spraying when the vision system realized that there was a gap between the trees.Water sensitive papers (WSP) were used to evaluate the sprayer performance in prompt spraying of the trees and cutting off at hollow spaces between the trees. Water sensitive papers were attached to three ropes extended along the movement direction of the tractor at top, middle, and bottom of the trees so that each tree comprised 9 WSPs whereas other 9 WSPs were placed at each gap between two successive trees. Three levels of forward speed of 2 km h-1, 3.5 km h-1and 5 km h-1 was tried in these experiments to evaluate the effect of forward speed on spraying performance. Experiments were conducted in three replications. Liquid consumption of the sprayer designed in this research was compared with the conventional overall spraying.Results and DiscussionAnalysis of variances of data gained from water sensitive paper corresponding to the sprayed areas showed a significant effect of forward speed on prompt spraying.Comparison of means of spraying coverage on WSPs at different forward speeds with four replications showed that the maximum amount of targeted sprayed pesticide has been achieved at the lowest speed (2 km h-1) while the lowest amount of sprayed was seen at the maximum speed. Although higher forward speed is preferred because it increases the operation capacity of the sprayer, increasing the forward speed of the sprayer reduces the coverage density of the liquids on WSPs because the output rates of the nozzles are constant. Therefore, in cases that higher forward speed is demanded, more nozzles should be added to the sprayer booms Comparison between the liquid consumptions of the proposed system and conventional overall spraying showed that in this study, up to 54% less material has been used for the experiment in olive orchard. ConclusionsThe sprayer designed in this study was able to detect the gap between the trees in orchards using a machine vision system to stop the spraying on places where no tree exists. Results showed that employing the new sprayer decreased a significant amount of spray liquids which can be important both economically and environmentally. Considering to lack of pesticide spraying in the hollow spaces between the trees, certainly, more significant reduction is expected to achieve in young orchards where trees are small and there are larger gaps between the trees
Authors and Affiliations
H. Asaei,A. A. Jafari,M. Loghavi,
Keywords
Related Articles
- EP ID EP717828
- DOI -
- Views 76
- Downloads 0
Implementation of a Machine Olfaction for the Detection of Adulteration in Cow Ghee
IntroductionOne the most important discussions of the world community is the importance and the role of edible oils in the nutrition and physical health of individuals, especially in the prevention of cardiovascular dise...
Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions
Introduction During filling a silo, granular material containing a range of particle sizes, the fine material accumulates under the filling point. The inclined surface of stationary bed particle which is formed in silos...
Economic Evaluation of using Different Tillage Methods and Crop Rotation in Rain-Fed Wheat Cultivation
IntroductionSoil protection against water and wind erosion is of great importance. Since most soils of arid and semi-arid regions of Iran are poor in organic matter and continuous use of conventional tillage (moldboard p...
Comparison of Technical and Economical Effect of Different Planters using Varied Seed Rates on Canola Yield in Moghan Region
Introduction One of the most important agricultural crops is rape seed oil as its special features can play an important role in the agricultural region. Due to the presence of more than 40% oil and 25% protein in the gr...
Wind Energy Potential Assessment for Electric Pumps of Agriculture in Broujerd
In order to restrain the potential of wind energy, the first step is to determine the wind energy potential. In this study the wind data was used from the three-hour frequency recording of 10-year period (2002-2011). To...