Development and Optimization of Experimental Data based Models for Bamboo Sliver Cutting by using Human Powered Flywheel Motor
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
This paper presents the development of the experimental data based mathematical models for cutting the slivers from bamboo by means of human powered flywheel motor. There were various dependent and independent variables involved in the process of cutting the bamboo sliver by human powered flywheel motor. Therefore, apart from formulation and development of the model, the optimization was done to find the best sets of the independent variable to achieve the responses as an output. The bamboo sliver cutting machine was designed, fabricated and based on the theory of experimentation, the experiment was performed and total 108 sets of readings were recorded. In this work, the responses of three response variables such as number of slivers, processing time and resistive torque were experimentally studied and the experimental data based models for these three response variables are optimized to get the best set of independent variables involved in the bamboo sliver cutting process.
Authors and Affiliations
SIDDHARTH K. UNDIRWADE
Keywords
Related Articles
- EP ID EP281011
- DOI 10.24247/ijmperdfeb2018121
- Views 89
- Downloads 0
Experimental Study on a Spark Ignitio Engine Fuelled with Petrol and N-Butanol Blends
An Experimental study was carried out on a Twin cylinder, Car-Spark Ignition Engine with MPFI fuel system, then the Engine Runs at the constant speed of 2500rpm for all loads, Fuelled with petrol and n-Butanol blends at...
Experimental Evaluation of Closed Loop Pulsating Heat Pipe with Water based Working Fluids
In this paper, thermal performance of closed-loop pulsating heat pipe was experimentally analysed. PHP consists of three different sections namely evaporator, adiabatic and condenser. For experimentation copper tube havi...
A Review on Acoustical Properties Measurement Methods and A Proposed Novel Method for Acoustical Characterization of Laminated Glass used in Automotive Applications
Many-a-time, deviation of attention of driver due to excessive noise is among the major factors responsible for accidents, and 54.3 dB of the sound between 500 to 5000 Hz is the high noise transmitted to the driver among...
EXPERIMENTAL EVALUATION OF PERFORMANCE OF AIR-CONDITIONING COMPRESSOR DUE TO AL2O3 NANOPARTICLES IN LUBRICATING OIL
Nanoparticles are being widely used in recent years, due to their advantages. Addition of nanoparticles leads to significant change in thermal properties of a fluid. A new engineering medium, called nanofluid attracted a...
Improve Gasoline Octane Number and Studying Reid Vapor Pressure Effect and Calorific Value by using Environmental Additives
An assessment for the addition of DO and DOA on the octane number and Reid vapor pressure (RVP) of gasoline with different chemical compositions. The locally produced gasoline was blended with three different ratios (v/v...