Development of a method for computer simulation of a swinging spring load movement path
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 7
Abstract
<p>Studies of geometric modeling of non-chaotic periodic paths of movement of loads attached to a variety of mathematical pendulums were continued. Pendulum oscillations in a vertical plane of a suspended weightless spring which maintains straightness of its axis were considered. In literature, this type of pendulum is called a swinging spring. The sought path of the load of the swinging spring was modeled with the help of a computer using values of the load weight, stiffness of the spring and its length without load. In addition, initial values of oscillation of the swinging spring were used: initial angle of deviation of the spring axis from the vertical, initial rate of change of this angle as well as initial parameter of the spring elongation and initial rate of elongation change. Calculations were performed using Lagrange equation of the second kind. Variants of finding conditionally periodic paths of movement of a point load attached to a swinging spring with a movable fixing point were considered.</p><p>Relevance of the topic was determined by necessity of study and improvement of new technological schemes of mechanical devices which include springs, in particular, the study of conditions of detuning from chaotic oscillations of the elements of mechanical structures and determination of rational values of parameters to ensure periodic paths of their oscillation.</p><p>A method for finding values of a set of parameters for providing a nonchaotic periodic path of a point load attached to a swinging spring was presented. The idea of this method was explained by the example of finding a periodic path of the second load of the double pendulum.</p><p>Variants of calculations for obtaining periodic paths of load movement for the following set parameters were given:</p><p>‒ length of the spring without load and its stiffness at an unknown value of the load weight;</p><p>‒ length of the spring without load and the value of the load weight at unknown spring stiffness;</p><p>‒ value of the load weight and stiffness of the spring at an unknown length of the spring without load.</p><p>As an example, determination of the values of a set of parameters to provide a non-chaotic, conditionally periodic path of movement of a point load attached to a swinging spring with a movable attachment point was considered.</p><p>Phase paths of functions of generalized coordinates (values of angles of deflection of the swinging spring axis from the vertical and extension of the spring) were constructed with the help of which it is possible to estimate ranges of these values and rates of their variation.</p>The results can be used as a paradigm for studying nonlinear coupled systems as well as in calculating variants of mechanical devices where springs affect oscillation of their elements when it is necessary to detune from chaotic movements of loads in the technologies using mechanical devices and provide periodic paths of their movement
Authors and Affiliations
Leonid Kutsenko, Oleg Semkiv, Andrii Kalynovskyi, Olga Shoman, Gennadii Virchenko, Viacheslav Martynov, Maxim Zhuravskij, Volodymyr Danylenko, Nelli Ismailova
Keywords
Related Articles
- EP ID EP666208
- DOI 10.15587/1729-4061.2019.154191
- Views 90
- Downloads 0
Bowl bladed hydrokinetic turbine with additional steering blade numerical modeling
<p>Bowl bladed kinetic turbine has a low performance. This is a simple turbine, easy to make, easy to install and inexpensive. Kinetic turbines are made specifically for rural areas which may be far from technology facil...
Development of a method for the synthesis of a threedimensional model of power transmission lines for visualization systems of training complexes
<p class="a"><span lang="EN-US">Representation of the wire line shape depending on the wire tension and temperature was considered. A method was developed for constructing a geometric threedimensional line model and syn...
Performance investigation of dual shaft hybrid vertical turbines using directional fins
<p class="MsoNormal"><span lang="EN-US">The current direction of wind turbine development is more on horizontal wind turbine types because of its efficiency, which is better than vertical wind turbines. But there are som...
Studying the possibility of using enzymes, lecithin, and albumen in the technology of gluten-free bread
<p>The comprehensive approach to the technology of bread for people suffering from celiac disease by applying amylolytic enzymes, lecithin, and dry egg albumen was scientifically substantiated.</p><p>The effect of amylol...
Aloe vera as cutting fluid optimization using response surface method
<p>The fluid of vegetable Aloe Vera has characteristics as a cutting fluid, Aloe Vera cutting fluid (AVCF) has an excess of environmental reduction effects from oil-based cutting fluid (OBCF). Surface Response Methodolog...