Development of a new process for expanding stepped tapered rings
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 1
Abstract
A new method for expanding large-size tapered rings with a stepped profile has been considered. The proposed method consists in expanding the blank with the help of a stepped die. A procedure for conducting studies by the method of finite elements was proposed. The procedure is intended to determine dependences of the stress-strain state and shape change during the expanding process by means of a stepped die. Variable parameters included relative height of the stepped blank protrusion which varied in the range of 2.2...2.5. Based on the finite-element modeling, distribution of deformation rate in the forging section after expanding with the help of a stepped die was established. The forging taper formed by expanding in this way was determined. Results of finite-element modeling were verified by experimental studies with lead and steel specimens. A procedure for conducting experimental studies was proposed. The finite-element modeling has allowed us to establish that expanding with the help of a stepped die results in a tapered forging shape. This is explained by the fact that when the wall is reduced, tangential deformation of the annular blank in the wall zone is larger than that in the protrusion zone because of different height of the stepped blank. The results of finite-element modeling were confirmed by experiments in laboratory conditions with lead and steel specimens. Increase in diameter of the blank protrusion leads to an increase in rate of the protrusion deformation which causes an increase in diameter of the protrusion bore. Analysis of macrostructure of the annular forging with a tapered stepped profile has made it possible to establish that when the stepped blank is shaped with the help of a stepped die, metal fibers repeat the target part contour which prevents their cutting during machining. The study has established that expanding of stepped tapered blanks is realizable. It expands technological potentials of the process of expanding large-sized forgings
Authors and Affiliations
Oleg Markov, Oleksiy Gerasimenko, Leila Aliieva, Alexander Shapoval, Maksym Kosilov
Keywords
Related Articles
- EP ID EP666265
- DOI 10.15587/1729-4061.2019.160395
- Views 85
- Downloads 0
Development of the composite material and coatings based on niobium carbide
<p class="a">We investigated the structure of composites based on the system NbC with a copper bond, obtained by impregnating the porous carbide skeletons with a metallic melt in a vacuum. In order to receive a porous sk...
Development of complex-structure ore deposits by means of chamber systems under conditions of the Kryvyi Rih iron ore field
<p>In order to keep their positions in the world markets, mining enterprises of the Kryvyi Rih iron ore field using the deep-mine method need to develop a resource-saving technology for the development of the fields repr...
Optimization of angular velocity of drum mixers
<p>Drum mixers ensure a high level of uniformity when mixing the components of feed additives. However, the issues on theoretical and experimental substantiation of the structural and kinematic parameters of drum mixers...
Construction of an analytical method for limiting the complexity of neural-fuzzy models with guaranteed accuracy
<p>We have proposed an analytical method for limiting the complexity of neural-fuzzy models that provide for the guaranteed accuracy of their implementation when approximating functions with two or more derivatives. The...
Development of geomodel for concentration determination of hazardous chemicals in the atmosphere
A critical analysis of the approaches to the development of a model for determining the concentration of hazardous chemicals (HC) in the atmosphere, which are the basis of computeraided environmental monitoring systems...