DEVELOPMENT OF AN EFFECTIVE TECHNOLOGY FOR DEEP PURIFICATION OF WATER FROM SUSPENDED SOLIDS TO MAINTAIN RESERVOIR PRESSURE
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 3
Abstract
Using for example Uzen oil and gas field, this article explores the peculiarities of oil production at fields located at the middle and late stages of development. Particular attention is paid to the need to pump water into the reservoir to maintain reservoir pressure. The main methods of purification of oilfield wastewater are considered. The Uzen field was analyzed in detail, the requirements for water quality to maintain reservoir pressure, as well as presented results of monitoring of solids and oil products in the injected water of the Uzen field. According to the injected reservoir water data at the Uzen field, we have built a projection model that takes into account the content of mechanical additions. The tests made in the reservoir of wastewater pumped at Uzen formation proposed experimental setup for water purification to maintain reservoir pressure. Experiments on water purification showed significant results.
Authors and Affiliations
Dayrabay Zh. Abdeli, Wisup Bae, Assel B. Seiden
Keywords
Related Articles
- EP ID EP572150
- DOI 10.26480/jmerd.03.2019.24.29
- Views 76
- Downloads 0
COMPUTER WITH CHANGEABLE ARCHITECTURE
The relevance of this article is that, despite the rapid development of computer technologies, it has not been yet invented the architecture that did not have vulnerabilities for hacker attacks. The purpose of the paper...
SPECIFIC FEATURES OF RESEARCH AND DEVELOPMENT OF THE PASSIVE REDUNDANT SUBSYSTEMS OF THE AIRCRAFT WITH DUE CONSIDERATION OF TOLERANCES
The goal of this paper is to determine the specific features, which must be taken into consideration in the course of research and development of the passive redundant subsystems with due consideration of tolerances in t...
FERROFLUID LUBRICATION OF A LONGITUDINALLY ROUGH ROTATING CIRCULAR STEP BEARING
This investigation tries to examine the effect of magnetic fluid lubrication on the behaviour of a longitudinally rough rotating circular step bearing resorting to the stochastic model of Christensen and Tonder. The magn...
INFLUENCE OF SIZE AND WEIGHT FRACTION OF CARBON NANOTUBE ON COEFFICIENT OF THERMAL EXPANSION OF Al-CNT METAL MATRIX
Metal matrix composites are grabbing more attention by researchers due to their outstanding properties which meets the requirements of a specific application. The work presented in the current paper investigates the infl...
STUDY ON THE BREAKDOWN OF MILLING BALLS MADE OF 13%Cr WHITE CAST-IRON WORKING IN STRONG ABRASIVE AND CLASH CONDITIONS
The breakdown due to abrasion and clash of the milling balls made of 13% Cr white cast iron is a complicated process which depends on many factors, especially on the strength of the matrix and carbide phases. As shown, s...