Development of calculation schemes for the combined extrusion to predict the shape formation of axisymmetric parts with a flange
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 3, Issue 1
Abstract
<p>We have developed calculation schemes for the process of combined radial-reverse extrusion of parts with a flange. Based on the energy method, we have derived formulae for calculating the reduced pressure of deformation and a phased increase in the dimensions of a semi-finished product. Relevance of the research is based on ensuring the simplification of estimation of the application of a given deformation process to obtain parts with a required configuration. In addition, we have proved the efficiency of determining the limit of using the derived calculation scheme for ratios 2h<sub>1</sub>R<sub>2</sub>/(R<sub>2</sub><sup>2</sup>–R<sub>1</sub><sup>2</sup>)<1.</p><p>We analyzed a product range manufactured at the enterprises of machine-building and instrument-making, which includes a significant number of hollow parts with flanges and branches of various shapes. It was substantiated that the use of combined extrusion schemes in the manufacture of parts of the type «a cup with a flange», when compared to employing simple deformation techniques, improves technological possibilities of the process. That is achieved through the reduction in energy costs, as well as in the number of technological transitions, and through making the shape of the parts obtained more complex. We confirmed the lack of proper studies into technologies for the implementation of combined extrusion schemes and the absence of appropriate technological recommendations. We determined the power mode of extrusion that corresponds to reality and estimated a possibility to control the outflow of metal at deformation. A study was conducted into the process of cold combined extrusion of hollow parts with a flange; the calculation schemes of the process were proposed. We modeled the process of combined extrusion based on the experimental-analytical method and established patterns in the shape formation of parts with a flange due to the geometrical and technological parameters. Data were acquired on the phased form change in a semi-finished product in the process of deformation. It was confirmed that the proposed models simplify the development of technological recommendations to determine the power mode of extrusion and to control the outflow of metal during deformation process.</p>
Authors and Affiliations
Kateryna Vlasenko, Natalia Hrudkina, Irina Reutova, Olena Chumak
Keywords
Related Articles
- EP ID EP527954
- DOI 10.15587/1729-4061.2018.131766
- Views 65
- Downloads 0
Development of vehicle speed forecasting method for intelligent highway transport system
<p>Interaction of vehicles on an intercity highway is considered. The vehicle control model here is idealized, close to the 4th generation automated intelligent transport system. Each vehicle has the desired motion progr...
Numerical study of flows in axial compressors of aircraft gas-turbine engines
<p>Design and adjustment of compressors at modern gas-turbine engines are based on the wide use of numerical analysis methods of a various level of complexity. Such approaches make it possible to analyze the alignment of...
Estimation of technological properties of nut meals and their effect on the quality of emulsion for butter biscuits with liquid oils
<p>We have examined the technological properties of cedar nut meal (CNM) and walnut nut meal (WNM). It was established that nut meals are the highly dispersed powders whose degree of dispersion exceeds that of wheat flou...
Investigation of flaxseed meal proteins and their influence on wheat dough
<p>For the purpose of enrichment by protein substances, balanced by amino acid composition, the feasibility of using flax meal in the recipe of bakery products, which are the basis of diets, including in restaurants, is...
Development of portable dc voltage calibrators with additive offsets adjusting
<p>Improvement of portable equipment for controlling the DC voltage measuring channels of cyber-physical systems at the operating sites is proposed. Additive offsets and drifts make a dominant contribution to the error o...