Development of nanomodifiedrapid hardening fiber-reinforced concretes for special-purpose facilities
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 6
Abstract
<p>Experimental studies confirmed that the development of rapid-hardening concretes with high resistance to a high-velocity impact for special-purpose facilities is achieved through the multilevel modification of the structure. The introduction of dispersed fibers ensures optimization of a structure at the macro- and mesolevel. At the micro- and nano-leves ‒ by energetically active ultra- and nanofine mineral additives and a high-reducing polycarboxylate superplasticizer. We established high efficiency of the influence of an organo-mineral nanomodifier containing polycarboxylate superplasticizer, micro- and nano-silica on the workability of the concrete mixture and the kinetics of concrete hardening based on it. We detected a directional formation of the structure and the preset properties of concretes of highly flowing mixtures at both early and late stages of hardening. We established that the early strength of nanomodified concretes increases by 4.8‒5.1 times, and strength after 28 days ‒ by 2.0‒2.3 times. The study showed that an increase in the number of contacts, reduction in size and the number of initial defects and increasing the homogeneity of nanomodified concrete leads to the creation of a dense, fine-porous, less defective structure. Ensuring such a structure of nanomodified fiber-reinforced concretes leads to an increase in deformation characteristics, specifically stiffness and elasticity, which make it possible to withstand greater stresses at a constant value of relative deformations. We carried out tests on resistance of nanomodified fiber-reinforced concretes under conditions of action of a high-velocity impact that indicate their increased impact viscosity. Thus, we can argue about the relevance of a mechanism for the formation of regulated properties of nanomodified fiber-reinforced concretes and about practical attractiveness of the proposed technological solutions.</p>
Authors and Affiliations
Uliana Marushchak, Myroslav Sanytsky, Sergiy Korolko, Yuriy Shabatura, Nazar Sydor
Keywords
Related Articles
- EP ID EP527889
- DOI 10.15587/1729-4061.2018.127001
- Views 64
- Downloads 0
Studying the influence of uv adsorbers on optical characteristics of light-protective polymer films for textile materials
<p>The use of UV adsorbers included in composition of a polymer film is a promising way of color protecting against effects of light since application of the polymer to the textile material surface is a universal way of...
Developing and programming the algorithm of refinement of the crystal structure of materials with possible isomorphous substitution
In general, the software for analyzing data using the X-ray diffraction method does not include the possibility for using stoichiometric principles between chemical elements and the relations between the occupation of cr...
Evaluation of quality level in managing the development of industrial enterprises
<p>The research focuses on the substantiation of theoretical aspects and practical support for assessing the quality level of managing enterprises development taking into account the influence of the external and interna...
Study of low-emission multi-component cements with a high content of supplementary cementitious materials
<p>The studies have established the influence of various types of supplementary cementitious materials on physical and mechanical properties and structure formation of low-emission multi-component cements. The results of...
Analysis of the properties of antifriction composites based on aluminum alloy's grinding waste
<p>We developed antifriction composites based on regenerated grinding waste of AM4.5Kd aluminum alloy with the addition of МоS<sub>2 </sub>solid lubricant intended for work in contact pairs of post-printing machines, suc...