Development of Self Compacting Concrete Using Industrial Waste As Mineral And Chemical Additives
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 5
Abstract
This paper reports a research that investigated the application of industrial waste materials as mineral and chemical additives in the production of Self Compacting Concrete. The flow characteristics of the Self Compacting Concrete investigated were flowability, passing ability and segregation resistance in slump flow test, V-funnel test, L-box test and J-ring test. Pulverized fuel ash, carbide waste and quarry dust were used in concrete production. Compressive strength test was conducted on the hardened concrete after 28 days curing. Concrete mix ratio of 1:2:4 ( Cement : Sand : Gravel ) was used to produce concrete, using cement partially replaced with 5%, 10%, 15% and 20% pulverized fuel ash, carbide waste and quarry dust. Superplasticizer (Conplast SP 430) used in the mix was kept constant throughout the mixes at 1% of the total volume while water cement ratio of 0.45 was maintained in all mixes. Results of tests shows that the fresh Self Compacting Concrete produced with cement partially replaced with pulverized fuel ash, carbide waste, quarry dust and a combination of pulverized fuel ash and quarry dust satisfied requirements specified for Self Compacting Concrete. Flow ability, passing ability and resistance to segregation increase with pulverized fuel ash, carbide waste and quarry dust content. 28 day compressive strength of self-compacting concrete produced with only cement increased from 31.8 𝑁/𝑚𝑚2 to 37.6 𝑁/𝑚𝑚2 , 35.1 𝑁/𝑚𝑚2 and 43.5 𝑁/𝑚𝑚2 when cement was partially replaced with 20% pulverized fuel ash and a combination of 15% pulverized fuel ash and 15% quarry dust respectively. However, 28-day compressive strength decreased to 18.6 𝑁/𝑚𝑚2 when cement was partially replaced with 20% carbide waste. Optimum 28 day compressive strength value was obtained when cement was replaced with 15% pulverized fuel ash plus 15% quarry dust. Regression analysis was computed on the data obtained from the slump flow test, J ring test, V funnel test and V funnel test using Microsoft Excel software to obtain regression equations for the filling ability, passing ability and segregation resistance.
Authors and Affiliations
Onuegbu. O. Ugwu, C. U. Nwoji, Michael E. Onyia, Atom Gber, Thaddeus T. Tarzomon, Ogbo E. Happiness
Evaluation of operating characteristics of a HFO fired Diesel Engine Power Plant in Bangladesh
This study aims at investigating the performance of a 50 MW capacity Diesel engine power plant run mostly byHFO (heavy fuel oil). The plant consists of six identical Diesel engines of 20 cylinders in each, arranged in V-...
Non-Linear Dynamic Analysis of Guyed Towers to Wind Loading
A nonlinear deterministic approach for predicting the wind response of guyed towers is described in this paper. The nature of wind, static and dynamic wind effect are defined. In the present approach, the time space hist...
Characterization and Utilization of ETP Sludge of an Automobile Industry for Development of Construction Product
Laboratory scale studies were carried out for partial utilization of ETP sludge generated from an automobile industry for the development of building products. The chemical properties were determined using XRF show that...
Lagrangian Coherent Structure Analysis of Jellyfish Swimming Using Immersed Boundary FSI Simulations
In this paper, medusan swimming in a quiescent fluid flow environment is simulated via a two-way nonlinear fluid-structure interaction (FSI) technique with the aid of immersed boundary method (IBM). In this regard, incom...
Parametric Study of Laterally Loaded Pile Foundation
The pile foundation is an effective foundation system commonly used to support high rise buildings. The use of pile foundation tends to reduce the chances of displacement. In conventional analysis & design of laterally l...