Different Control Algorithms for Single- Phase UPQC-a simulation study

Abstract

This paper employs a single-phase unified power quality conditioner (UPQC), an integration of shunt and series active power filters (APFs), for power factor correction and mitigation of voltage and current harmonics. Both the shunt and series APFs are realized using a single-phase, two leg voltage source inverter (VSI). For the control of series APF, a simple control strategy based on Unit Vector Template (UVT) technique, is utilized, while six different control strategies are proposed for the control of shunt APF. In each proposed control strategy the control is made over the fundamental current and fundamental voltage instead of the fast changing APFs current and voltage, thereby reducing the computational delay. A dynamic model of the UPQC is developed in the MATLAB/SIMULINK enviournment and the simulation results demonstrating the power quality improvement in the system are presented for distorted supply and a combination of linear and non-linear load. A comparison, in terms of total harmonic distortion (THD), in source current and load voltage is also made for different control algorithms.

Authors and Affiliations

Yash Pal , A. Swarup , Bhim Singh

Keywords

Related Articles

Influence of succinic acid on the corrosion inhibition of Sodium metavanadate in chloride medium

The inhibition efficiency (SMV) – succinic acid system is controlling corrosion of carbon steel in an aqueous solution containing 60 ppm of Cl- has been evaluated by weight loss method.250 ppm of SMV has 56% of IE. Addit...

Experimental Studies on the Effect of Ceramic fine aggregate on the Strength properties of Concrete

Increased construction activity and continuous dependence on conventional materials of concrete marking are leading to scarcity of the construction material and increased construction cost. In this study an attempt has b...

Stress analysis of ceramic lined, composite or steel Jacketed Pressure Vessels

Stress analysis of ceramic-lined cannon pressure vessels is described, for a S13N4 or SiC liner and A723 steel or carbon-epoxy jacket and with an initial residual interface pressure between liner and jacket and pressure...

Wireless Sensor Network for snow-met data monitoring in Indian Himalayas - A Review

Appreciating the future possibilities, Wireless Sensor Networks (WSN) is important as it connects the physical world of our surroundings to the vast computing & storage resources. Today, WSN is being used in military...

HUMAN PROTEIN FUNCTION PREDICTION- A DOCKING BASED APPROACH

Proteins are the most important macromolecules of life. The knowledge of protein function is an important link for the development of drugs, crop development and synthetic bio-chemicals like bio fuels. Different techniqu...

Download PDF file
  • EP ID EP160773
  • DOI -
  • Views 140
  • Downloads 0

How To Cite

Yash Pal, A. Swarup, Bhim Singh (2011). Different Control Algorithms for Single- Phase UPQC-a simulation study. International Journal of Advances in Engineering, Science and Technology, 1(1), 12-16. https://europub.co.uk./articles/-A-160773