DISTRIBUTED EXTERNAL SURFACE HARDENING OF CAR DESIGN BY WINDING
Journal Title: Наука та прогрес транспорту - Year 2017, Vol 0, Issue 2
Abstract
Purpose. The paper involves coverage of features and results of the research conducted by the authors to determine the feasibility and establishment of pre-stressed-strained state of freight cars by winding in order to improve their strength characteristics. It is also necessary to present the theoretical justification for the effectiveness of the application of this method for car designs and an appropriate example for the tank-car. Methodology. The conducted study is based on an analysis of known works on the subject, mathematical justification and computer modeling. At the calculations of rolling stock components contemporary conventional techniques were used. Findings. Authors found that the winding method for pre-stressed-strained state is effective and appropriate for use in the construction of railway rolling stock and, in particular freight cars. Freight car designs with the pre-stressed-strained state are characterized by a number of strength advantages, among which there is an improvement of the work on the perception of operational loads and resource conservation. Originality. For the first time it is proposed the improvement of bearing capacity of freight car constructions through the creation of its component in the directed stress-strained state. It is also for the first time proposed the use of distributed external surface hardening by the method of winding to create a pre-stress-strained state of structural components of freight cars. The methods for winding designs of freight cars and their implementation were considered. Practical value. The studies developed a number of technical solutions for improving the design of freight cars and tank-container, which has been patented. Corresponding solutions for the tank-car are partially presented. Practical implementation of such solutions will significantly improve the technical, economic and operational performances of car designs.
Authors and Affiliations
O. V. Fomin, A. A. Stetsko, V. Y. Osmak
Keywords
Related Articles
- EP ID EP228662
- DOI 10.15802/stp2017/100232
- Views 75
- Downloads 0
INTERACTION OF SOIL-CEMENT PILE SUPPORTING STRUCTURES WITH THE BODY OF A LANDSLIDE
Purpose. Analysis and comparison of the landslide slope finite element model calculation results of the appliance of soil-cement piles, depending on the variation of the retaining structure rigidity, makes it possible to...
RESEARCH OF HYDRAULIC IMPACT ON THE TECHNOLOGICAL STABILITY OF SHALLOW METROTUNNEL IN DREDGING MASSIVES
Purpose. On the basis of the results analysis of the computer simulation and laboratory studies it is necessary to determine the changes impact dependence of the hydraulic level of groundwater on the tunnels processing s...
ВЫБОР РАЦИОНАЛЬНЫХ ПАРАМЕТРОВ НОМИНАЛЬНОГО РЕЖИМА ЭЛЕКТРОПОЕЗДОВ С АСИНХРОННЫМ ТЯГОВЫМ ПРИВОДОМ
Цель. Параметры номинального режима относятся к важнейшим эксплуатационным показателям тяговых средств, поэтому задачи выбора их оптимальных значений всегда неизбежно возникают при формировании технических требований на...
ВПЛИВ ПОЗДОВЖНЬОГО ТА ПОПЕРЕЧНОГО ЗМІЩЕННЯ ЦЕНТРУ ВАГИ ВАНТАЖУ В ПІВВАГОНАХ НА ЇХ ДИНАМІЧНІ ПОКАЗНИКИ
Мета. Підвищення швидкості руху залізничних екіпажів дозволяє посилити інтеграційні процеси з країнами Європи й Азії, проте призводить до необхідності вдосконалення контролю, кількісної оцінки динамічної завантаженості р...
STRESS-STRAIN STATE OF BEAM STAGED CONNECTION POINT OF THE RAILWAY BRIDGE TRACK-WAY
Purpose. The staged connections of the beams of railway bridge track-way have the simplest design, but some design flaws result in numerous defects. The purpose of the given work is to research the actual stress-train st...