Distribution of forces on supporting teeth in the midpalatal expander during “Hyrax” screw pre-load
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2019, Vol 1, Issue 93
Abstract
Purpose: The aim of the study was to determine forces which are transferred to supporting teeth during the treatment with the midpalatal device with Hyrax screw and to evaluate orthodontic and orthopaedic effects based on displacement analysis. Design/methodology/approach: The finite element method (FEM) was used to simulation the midpalatal expansion forces activated by the screw pre-loaded during a turn of 180° which corresponds to daily recommended value. Distribution of expansion forces of Hyrax device was calculated as reaction forces on elastic supports with stiffness corresponding to the teeth working on periodontal ligament in alveolar bone. Findings: On the basis of the displacement analysis was observed the movement of supporting teeth by a value higher than 0.1 mm which corresponds to the recommended daily value. The midpalatal suture splitting forces were determined on the first premolars with a value of 32.8 N and on the first premolars of 44.2 N. Research limitations/implications: The studies did not take into account the shape of palate other craniofacial bones and their stiffness. Practical implications: Adjusting the stiffness of the device to degree of ossification midpalatal suture and teeth mobility. Searching for new solutions which eliminate the negative phenomenon of tilting teeth during the expansion of maxilla and recommending a surgically assisted techniques. Originality/value: The simulation confirmed that treatment with Hyrax screw gives a uniform expansion with values of forces corresponded to stiffness of premolar and molar teeth. The studies have indicated a possibility of tendency to tilting the supporting teeth what is a negative phenomenon.<br/><br/>
Authors and Affiliations
K. Młynarek, J. Żmudzki
Keywords
Related Articles
- EP ID EP641587
- DOI 10.5604/01.3001.0013.4138
- Views 139
- Downloads 0
Application of FMEA method for an analysis of selected production process
Purpose: The article presents an application of FMEA method in a process of chimney system production. The analysis allowed to decrease a potential defects and their effects in the analysed process. Design/methodology/ap...
The influence of burnishing parameters on the hardness and roughness on the surface layer stainless steel
Purpose: The aim of the study was description to the influence of technological parameters of burnishing process on the degree of relative strain hardening and surface roughness reduction ratio. Design/methodology/approa...
Charasteristics of TiCN coating deposited by cathodic arc evaporation
Purpose: In this paper, we report the research results on the structure and mechanical and tribological properties of TiCN coating deposited by cathodic arc evaporation process on the X40CrMoV5-1 steel substrate. Design/...
Development and manufacturing of customized milling cutters for individual tool-making industry
Purpose: Purpose of this paper is to present results obtained during developing new cutting tools for individual tool industry. The aim of the research was to develop customized ball end milling tools with longer tool-li...
Determination of the best microstructure and titanium alloy powders properties using neural network
Purpose: Create a software product using a probabilistic neural network (PNN) and database based on experimental research of titanium alloys to definition of the best microstructure and properties of aerospace components...