Drop dispensing in a viscous outer liquid
Journal Title: INCAS BULLETIN - Year 2017, Vol 9, Issue 4
Abstract
The formation and detachment of Newtonian drops in viscous external liquids is investigated. A global analysis of two necking processes is presented in order to highlight the behavior of such thinning phenomena, when controlled either by inertia or by viscous effects. Moving detached droplets in an immiscible outer liquid were studied in terms of velocity and drop-travel distance. Theoretical predictions are proposed and compared with experimental data for the volume of the drop and for the subsequent dynamics that follow after detachment. Our investigations point out that the drop rapidly achieves constant velocity, the value of it being in a satisfactory agreement with the model. Both the influence of the flow rate and that of the material properties on drop volume are pursued.
Authors and Affiliations
Claudiu PATRASCU, Eugen CHIRIAC, Corneliu BALAN
Keywords
Related Articles
- EP ID EP294543
- DOI 10.13111/2066-8201.2017.9.4.9
- Views 84
- Downloads 0
Longitudinal Absolute Stability of a BWB Aircraft-Pilot System with Saturated Actuator Model
This paper deals with the analysis of the P(ilot) I(n-the-Loop) O(scillations) of the second category (with rate and position liming in the closed loop pilot-vehicle system), caused by the dynamic coupling between the hu...
A Characterized Status Report on Pulse Detonation Engine
Pulse Detonation Engine (PDE), is an exciting propulsion technology for the future and has been able to seek considerable attention over the last era. It has the potential to work efficiently in the modern cosmos. It wor...
Environmental mobile robot based on artificial intelligence and visual perception for weed elimination
This research presents a new editing design for the pioneer p3-dx mobile robot by adding a mechanical gripper for eliminating the weed and a digital camera for capturing the image of the field. Also, a wireless kit that...
A Rotary Wing System for Micro Air Vehicle Applications. Part 1
The goal of the paper is to propose a new type of ornithopter that avoids the mechanical difficulties of a flapping system. It uses a modified design of a cycloidal propulsor. The modification regards the special setting...
Tribological performance of the blend PBT and short aramid fibers
Polybutylene terephthalate (PBT) and its aramid fiber composite (10 wt.%) were investigated in order to measure their wear and frictional properties under variations of applied load (5 N, 10 N, 15N) and velocity (0.25 m/...