DTC-RNA control with 36 sectors of induction motor by PI-fuzzy speed regulator
Journal Title: Recueil de mécanique - Year 2017, Vol 2, Issue 2
Abstract
Direct Torque Control (DTC) is the direct control of the electromagnetic torque of the machine. This article presents a 36-sectors DTC command of an induction machine based on intelligent controllers. A classical PI controller has been replaced with a PIfuzzy controller. Moreover, hysteresis regulators have been also replaced with two neuronal controllers. Matlab software has been used to visualize the results of simulation. The ripple of the electromagnetic torque, the stator flux, and the value of THD (Total Harmonic Distortion) of the stator current will be evaluated and compared by the classical DTC command with 36 sectors.
Authors and Affiliations
Habib BENBOUHENNI
Keywords
Related Articles
- EP ID EP301909
- DOI 10.5281/zenodo.1173683
- Views 47
- Downloads 0
The highlighting of an internal combustion engine piston ring radial oscillations
This paper deals with the definition of the lube-oil film thickness in the piston ring cylinder liner junction of an internal combustion engine. At first, a mathematical model for the estimation of the film thickness is...
Presentation of a three-dimensional metrology software
This paper presents a three-dimensional metrology software,named « GFDSoft » Geometrical Form Defect Software, developed by MOULAI-KHATIR. GFDSoft implements the least squares adjustment criterion (which is the most comm...
Study of the pressure distribution during the optical glass polishing
The reproduction of very high quality surfaces during the optical glass polishing is the mannered main objective. To come closer this objective, it is necessary to take in consideration all polishing parameters while mor...
Numerical prediction of imperfections influence on the film cooling effectiveness
Film cooling is one of the most used techniques for cooling turbine blades. This process is influenced by several geometric and aerodynamic parameters. One such parameter is the geometric shape of the injection holes: th...
Numerical simulation of failure probability prediction: Application to cylindrical part of type III CNG storage vessel
The present paper focus on a numerical simulation failure probability prediction of cylindrical part of type III CNG storage vessel under pressure with end effect, which has a thin metallic envelope, called liner who is...